| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/s390: Make attach succeed when the device was surprise removed
When a PCI device is removed with surprise hotplug, there may still be
attempts to attach the device to the default domain as part of tear down
via (__iommu_release_dma_ownership()), or because the removal happens
during probe (__iommu_probe_device()). In both cases zpci_register_ioat()
fails with a cc value indicating that the device handle is invalid. This
is because the device is no longer part of the instance as far as the
hypervisor is concerned.
Currently this leads to an error return and s390_iommu_attach_device()
fails. This triggers the WARN_ON() in __iommu_group_set_domain_nofail()
because attaching to the default domain must never fail.
With the device fenced by the hypervisor no DMAs to or from memory are
possible and the IOMMU translations have no effect. Proceed as if the
registration was successful and let the hotplug event handling clean up
the device.
This is similar to how devices in the error state are handled since
commit 59bbf596791b ("iommu/s390: Make attach succeed even if the device
is in error state") except that for removal the domain will not be
registered later. This approach was also previously discussed at the
link.
Handle both cases, error state and removal, in a helper which checks if
the error needs to be propagated or ignored. Avoid magic number
condition codes by using the pre-existing, but never used, defines for
PCI load/store condition codes and rename them to reflect that they
apply to all PCI instructions. |
| In the Linux kernel, the following vulnerability has been resolved:
igc: don't fail igc_probe() on LED setup error
When igc_led_setup() fails, igc_probe() fails and triggers kernel panic
in free_netdev() since unregister_netdev() is not called. [1]
This behavior can be tested using fault-injection framework, especially
the failslab feature. [2]
Since LED support is not mandatory, treat LED setup failures as
non-fatal and continue probe with a warning message, consequently
avoiding the kernel panic.
[1]
kernel BUG at net/core/dev.c:12047!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 937 Comm: repro-igc-led-e Not tainted 6.17.0-rc4-enjuk-tnguy-00865-gc4940196ab02 #64 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:free_netdev+0x278/0x2b0
[...]
Call Trace:
<TASK>
igc_probe+0x370/0x910
local_pci_probe+0x3a/0x80
pci_device_probe+0xd1/0x200
[...]
[2]
#!/bin/bash -ex
FAILSLAB_PATH=/sys/kernel/debug/failslab/
DEVICE=0000:00:05.0
START_ADDR=$(grep " igc_led_setup" /proc/kallsyms \
| awk '{printf("0x%s", $1)}')
END_ADDR=$(printf "0x%x" $((START_ADDR + 0x100)))
echo $START_ADDR > $FAILSLAB_PATH/require-start
echo $END_ADDR > $FAILSLAB_PATH/require-end
echo 1 > $FAILSLAB_PATH/times
echo 100 > $FAILSLAB_PATH/probability
echo N > $FAILSLAB_PATH/ignore-gfp-wait
echo $DEVICE > /sys/bus/pci/drivers/igc/bind |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: increase scan_ies_len for S1G
Currently the S1G capability element is not taken into account
for the scan_ies_len, which leads to a buffer length validation
failure in ieee80211_prep_hw_scan() and subsequent WARN in
__ieee80211_start_scan(). This prevents hw scanning from functioning.
To fix ensure we accommodate for the S1G capability length. |
| Sandbox escape in the Storage: IndexedDB component. This vulnerability affects Firefox < 148, Firefox ESR < 140.8, Thunderbird < 148, and Thunderbird < 140.8. |
| pgAdmin versions 9.11 are affected by a Restore restriction bypass via key disclosure vulnerability that occurs when running in server mode and performing restores from PLAIN-format dump files. An attacker with access to the pgAdmin web interface can observe an active restore operation, extract the `\restrict` key in real time, and race the restore process by overwriting the restore script with a payload that re-enables meta-commands using `\unrestrict <key>`. This results in reliable command execution on the pgAdmin host during the restore operation. |
| A flaw was found in Moodle. An authorization logic flaw, specifically due to incomplete role checks during the badge awarding process, allowed badges to be granted without proper verification. This could enable unauthorized users to obtain badges they are not entitled to, potentially leading to privilege escalation or unauthorized access to certain features. |
| A path handling issue was addressed with improved validation. This issue is fixed in iOS 18.7.5 and iPadOS 18.7.5. Restoring a maliciously crafted backup file may lead to modification of protected system files. |
| Vulnerability CVE-2024-22021 allows a Veeam Recovery Orchestrator user with a low privileged role (Plan Author) to retrieve plans from a Scope other than the one they are assigned to.
|
| A code execution vulnerability exists in the Xiaomi App market product. The vulnerability is caused by unsafe configuration and can be exploited by attackers to execute arbitrary code. |
| Remote prevention of access to cellular service with no user interaction (for example, crashing the cellular radio service with a malformed packet) |
| Vulnerability in the Oracle Solaris product of Oracle Systems (component: Driver). The supported version that is affected is 11. Easily exploitable vulnerability allows high privileged attacker with logon to the infrastructure where Oracle Solaris executes to compromise Oracle Solaris. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Solaris accessible data as well as unauthorized access to critical data or complete access to all Oracle Solaris accessible data. CVSS 3.1 Base Score 5.8 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:H/UI:R/S:U/C:H/I:H/A:N). |
| ImageMagick is free and open-source software used for editing and manipulating digital images. The shipped "secure" security policy includes a rule intended to prevent reading/writing from standard streams. However, ImageMagick also supports fd:<n> pseudo-filenames (e.g., fd:0, fd:1). Prior to versions 7.1.2-15 and 6.9.13-40, this path form is not blocked by the secure policy templates, and therefore bypasses the protection goal of "no stdin/stdout." Versions 7.1.2-15 and 6.9.13-40 contain a patch by including a change to the more secure policies by default. As a workaround, add the change to one's security policy manually. |
| Information disclosure, mitigation bypass in the Settings UI component. This vulnerability affects Firefox < 148 and Thunderbird < 148. |
| Spoofing issue in the WebAuthn component in Firefox for Android. This vulnerability affects Firefox < 148 and Thunderbird < 148. |
| Same-origin policy bypass in the Networking: JAR component. This vulnerability affects Firefox < 148, Firefox ESR < 140.8, Thunderbird < 148, and Thunderbird < 140.8. |
| An issue in Statping-ng v.0.91.0 allows an attacker to obtain sensitive information via a crafted request to the admin parameter. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: properly keep track of conduit reference
Problem description
-------------------
DSA has a mumbo-jumbo of reference handling of the conduit net device
and its kobject which, sadly, is just wrong and doesn't make sense.
There are two distinct problems.
1. The OF path, which uses of_find_net_device_by_node(), never releases
the elevated refcount on the conduit's kobject. Nominally, the OF and
non-OF paths should result in objects having identical reference
counts taken, and it is already suspicious that
dsa_dev_to_net_device() has a put_device() call which is missing in
dsa_port_parse_of(), but we can actually even verify that an issue
exists. With CONFIG_DEBUG_KOBJECT_RELEASE=y, if we run this command
"before" and "after" applying this patch:
(unbind the conduit driver for net device eno2)
echo 0000:00:00.2 > /sys/bus/pci/drivers/fsl_enetc/unbind
we see these lines in the output diff which appear only with the patch
applied:
kobject: 'eno2' (ffff002009a3a6b8): kobject_release, parent 0000000000000000 (delayed 1000)
kobject: '109' (ffff0020099d59a0): kobject_release, parent 0000000000000000 (delayed 1000)
2. After we find the conduit interface one way (OF) or another (non-OF),
it can get unregistered at any time, and DSA remains with a long-lived,
but in this case stale, cpu_dp->conduit pointer. Holding the net
device's underlying kobject isn't actually of much help, it just
prevents it from being freed (but we never need that kobject
directly). What helps us to prevent the net device from being
unregistered is the parallel netdev reference mechanism (dev_hold()
and dev_put()).
Actually we actually use that netdev tracker mechanism implicitly on
user ports since commit 2f1e8ea726e9 ("net: dsa: link interfaces with
the DSA master to get rid of lockdep warnings"), via netdev_upper_dev_link().
But time still passes at DSA switch probe time between the initial
of_find_net_device_by_node() code and the user port creation time, time
during which the conduit could unregister itself and DSA wouldn't know
about it.
So we have to run of_find_net_device_by_node() under rtnl_lock() to
prevent that from happening, and release the lock only with the netdev
tracker having acquired the reference.
Do we need to keep the reference until dsa_unregister_switch() /
dsa_switch_shutdown()?
1: Maybe yes. A switch device will still be registered even if all user
ports failed to probe, see commit 86f8b1c01a0a ("net: dsa: Do not
make user port errors fatal"), and the cpu_dp->conduit pointers
remain valid. I haven't audited all call paths to see whether they
will actually use the conduit in lack of any user port, but if they
do, it seems safer to not rely on user ports for that reference.
2. Definitely yes. We support changing the conduit which a user port is
associated to, and we can get into a situation where we've moved all
user ports away from a conduit, thus no longer hold any reference to
it via the net device tracker. But we shouldn't let it go nonetheless
- see the next change in relation to dsa_tree_find_first_conduit()
and LAG conduits which disappear.
We have to be prepared to return to the physical conduit, so the CPU
port must explicitly keep another reference to it. This is also to
say: the user ports and their CPU ports may not always keep a
reference to the same conduit net device, and both are needed.
As for the conduit's kobject for the /sys/class/net/ entry, we don't
care about it, we can release it as soon as we hold the net device
object itself.
History and blame attribution
-----------------------------
The code has been refactored so many times, it is very difficult to
follow and properly attribute a blame, but I'll try to make a short
history which I hope to be correct.
We have two distinct probing paths:
- one for OF, introduced in 2016 i
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/poll: correctly handle io_poll_add() return value on update
When the core of io_uring was updated to handle completions
consistently and with fixed return codes, the POLL_REMOVE opcode
with updates got slightly broken. If a POLL_ADD is pending and
then POLL_REMOVE is used to update the events of that request, if that
update causes the POLL_ADD to now trigger, then that completion is lost
and a CQE is never posted.
Additionally, ensure that if an update does cause an existing POLL_ADD
to complete, that the completion value isn't always overwritten with
-ECANCELED. For that case, whatever io_poll_add() set the value to
should just be retained. |
| In the Linux kernel, the following vulnerability has been resolved:
net/handshake: restore destructor on submit failure
handshake_req_submit() replaces sk->sk_destruct but never restores it when
submission fails before the request is hashed. handshake_sk_destruct() then
returns early and the original destructor never runs, leaking the socket.
Restore sk_destruct on the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: defer interrupt enabling until NAPI registration
Currently, interrupts are automatically enabled immediately upon
request. This allows interrupt to fire before the associated NAPI
context is fully initialized and cause failures like below:
[ 0.946369] Call Trace:
[ 0.946369] <IRQ>
[ 0.946369] __napi_poll+0x2a/0x1e0
[ 0.946369] net_rx_action+0x2f9/0x3f0
[ 0.946369] handle_softirqs+0xd6/0x2c0
[ 0.946369] ? handle_edge_irq+0xc1/0x1b0
[ 0.946369] __irq_exit_rcu+0xc3/0xe0
[ 0.946369] common_interrupt+0x81/0xa0
[ 0.946369] </IRQ>
[ 0.946369] <TASK>
[ 0.946369] asm_common_interrupt+0x22/0x40
[ 0.946369] RIP: 0010:pv_native_safe_halt+0xb/0x10
Use the `IRQF_NO_AUTOEN` flag when requesting interrupts to prevent auto
enablement and explicitly enable the interrupt in NAPI initialization
path (and disable it during NAPI teardown).
This ensures that interrupt lifecycle is strictly coupled with
readiness of NAPI context. |
