| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the UDP processing code of Cisco IOS 15.1, 15.2, and 15.4 and IOS XE 3.14 through 3.18 could allow an unauthenticated, remote attacker to cause the input queue of an affected system to hold UDP packets, causing an interface queue wedge and a denial of service (DoS) condition. The vulnerability is due to Cisco IOS Software application changes that create UDP sockets and leave the sockets idle without closing them. An attacker could exploit this vulnerability by sending UDP packets with a destination port of 0 to an affected device. A successful exploit could allow the attacker to cause UDP packets to be held in the input interfaces queue, resulting in a DoS condition. The input interface queue will stop holding UDP packets when it receives 250 packets. Cisco Bug IDs: CSCup10024, CSCva55744, CSCva95506. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/imx-irqsteer: Handle runtime power management correctly
The power domain is automatically activated from clk_prepare(). However, on
certain platforms like i.MX8QM and i.MX8QXP, the power-on handling invokes
sleeping functions, which triggers the 'scheduling while atomic' bug in the
context switch path during device probing:
BUG: scheduling while atomic: kworker/u13:1/48/0x00000002
Call trace:
__schedule_bug+0x54/0x6c
__schedule+0x7f0/0xa94
schedule+0x5c/0xc4
schedule_preempt_disabled+0x24/0x40
__mutex_lock.constprop.0+0x2c0/0x540
__mutex_lock_slowpath+0x14/0x20
mutex_lock+0x48/0x54
clk_prepare_lock+0x44/0xa0
clk_prepare+0x20/0x44
imx_irqsteer_resume+0x28/0xe0
pm_generic_runtime_resume+0x2c/0x44
__genpd_runtime_resume+0x30/0x80
genpd_runtime_resume+0xc8/0x2c0
__rpm_callback+0x48/0x1d8
rpm_callback+0x6c/0x78
rpm_resume+0x490/0x6b4
__pm_runtime_resume+0x50/0x94
irq_chip_pm_get+0x2c/0xa0
__irq_do_set_handler+0x178/0x24c
irq_set_chained_handler_and_data+0x60/0xa4
mxc_gpio_probe+0x160/0x4b0
Cure this by implementing the irq_bus_lock/sync_unlock() interrupt chip
callbacks and handle power management in them as they are invoked from
non-atomic context.
[ tglx: Rewrote change log, added Fixes tag ] |
| In the Linux kernel, the following vulnerability has been resolved:
nfp: bpf: Add check for nfp_app_ctrl_msg_alloc()
Add check for the return value of nfp_app_ctrl_msg_alloc() in
nfp_bpf_cmsg_alloc() to prevent null pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
OPP: fix dev_pm_opp_find_bw_*() when bandwidth table not initialized
If a driver calls dev_pm_opp_find_bw_ceil/floor() the retrieve bandwidth
from the OPP table but the bandwidth table was not created because the
interconnect properties were missing in the OPP consumer node, the
kernel will crash with:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004
...
pc : _read_bw+0x8/0x10
lr : _opp_table_find_key+0x9c/0x174
...
Call trace:
_read_bw+0x8/0x10 (P)
_opp_table_find_key+0x9c/0x174 (L)
_find_key+0x98/0x168
dev_pm_opp_find_bw_ceil+0x50/0x88
...
In order to fix the crash, create an assert function to check
if the bandwidth table was created before trying to get a
bandwidth with _read_bw(). |
| In the Linux kernel, the following vulnerability has been resolved:
mfd: intel_soc_pmic_bxtwc: Use IRQ domain for PMIC devices
While design wise the idea of converting the driver to use
the hierarchy of the IRQ chips is correct, the implementation
has (inherited) flaws. This was unveiled when platform_get_irq()
had started WARN() on IRQ 0 that is supposed to be a Linux
IRQ number (also known as vIRQ).
Rework the driver to respect IRQ domain when creating each MFD
device separately, as the domain is not the same for all of them. |
| inc/functions_time.php in MyBB (aka MyBulletinBoard) 1.4.10, and possibly earlier versions, allows remote attackers to cause a denial of service (CPU consumption) via a crafted request with a large year value, which triggers a long loop, as reachable through member.php and possibly other vectors. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: Flush current cpu icache before other cpus
On SiFive Unmatched, I recently fell onto the following BUG when booting:
[ 0.000000] ftrace: allocating 36610 entries in 144 pages
[ 0.000000] Oops - illegal instruction [#1]
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.13.1+ #5
[ 0.000000] Hardware name: SiFive HiFive Unmatched A00 (DT)
[ 0.000000] epc : riscv_cpuid_to_hartid_mask+0x6/0xae
[ 0.000000] ra : __sbi_rfence_v02+0xc8/0x10a
[ 0.000000] epc : ffffffff80007240 ra : ffffffff80009964 sp : ffffffff81803e10
[ 0.000000] gp : ffffffff81a1ea70 tp : ffffffff8180f500 t0 : ffffffe07fe30000
[ 0.000000] t1 : 0000000000000004 t2 : 0000000000000000 s0 : ffffffff81803e60
[ 0.000000] s1 : 0000000000000000 a0 : ffffffff81a22238 a1 : ffffffff81803e10
[ 0.000000] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000
[ 0.000000] a5 : 0000000000000000 a6 : ffffffff8000989c a7 : 0000000052464e43
[ 0.000000] s2 : ffffffff81a220c8 s3 : 0000000000000000 s4 : 0000000000000000
[ 0.000000] s5 : 0000000000000000 s6 : 0000000200000100 s7 : 0000000000000001
[ 0.000000] s8 : ffffffe07fe04040 s9 : ffffffff81a22c80 s10: 0000000000001000
[ 0.000000] s11: 0000000000000004 t3 : 0000000000000001 t4 : 0000000000000008
[ 0.000000] t5 : ffffffcf04000808 t6 : ffffffe3ffddf188
[ 0.000000] status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000002
[ 0.000000] [<ffffffff80007240>] riscv_cpuid_to_hartid_mask+0x6/0xae
[ 0.000000] [<ffffffff80009474>] sbi_remote_fence_i+0x1e/0x26
[ 0.000000] [<ffffffff8000b8f4>] flush_icache_all+0x12/0x1a
[ 0.000000] [<ffffffff8000666c>] patch_text_nosync+0x26/0x32
[ 0.000000] [<ffffffff8000884e>] ftrace_init_nop+0x52/0x8c
[ 0.000000] [<ffffffff800f051e>] ftrace_process_locs.isra.0+0x29c/0x360
[ 0.000000] [<ffffffff80a0e3c6>] ftrace_init+0x80/0x130
[ 0.000000] [<ffffffff80a00f8c>] start_kernel+0x5c4/0x8f6
[ 0.000000] ---[ end trace f67eb9af4d8d492b ]---
[ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
[ 0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]---
While ftrace is looping over a list of addresses to patch, it always failed
when patching the same function: riscv_cpuid_to_hartid_mask. Looking at the
backtrace, the illegal instruction is encountered in this same function.
However, patch_text_nosync, after patching the instructions, calls
flush_icache_range. But looking at what happens in this function:
flush_icache_range -> flush_icache_all
-> sbi_remote_fence_i
-> __sbi_rfence_v02
-> riscv_cpuid_to_hartid_mask
The icache and dcache of the current cpu are never synchronized between the
patching of riscv_cpuid_to_hartid_mask and calling this same function.
So fix this by flushing the current cpu's icache before asking for the other
cpus to do the same. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix svm_migrate_fini warning
Device manager releases device-specific resources when a driver
disconnects from a device, devm_memunmap_pages and
devm_release_mem_region calls in svm_migrate_fini are redundant.
It causes below warning trace after patch "drm/amdgpu: Split
amdgpu_device_fini into early and late", so remove function
svm_migrate_fini.
BUG: https://gitlab.freedesktop.org/drm/amd/-/issues/1718
WARNING: CPU: 1 PID: 3646 at drivers/base/devres.c:795
devm_release_action+0x51/0x60
Call Trace:
? memunmap_pages+0x360/0x360
svm_migrate_fini+0x2d/0x60 [amdgpu]
kgd2kfd_device_exit+0x23/0xa0 [amdgpu]
amdgpu_amdkfd_device_fini_sw+0x1d/0x30 [amdgpu]
amdgpu_device_fini_sw+0x45/0x290 [amdgpu]
amdgpu_driver_release_kms+0x12/0x30 [amdgpu]
drm_dev_release+0x20/0x40 [drm]
release_nodes+0x196/0x1e0
device_release_driver_internal+0x104/0x1d0
driver_detach+0x47/0x90
bus_remove_driver+0x7a/0xd0
pci_unregister_driver+0x3d/0x90
amdgpu_exit+0x11/0x20 [amdgpu] |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpt3sas: Fix kernel panic during drive powercycle test
While looping over shost's sdev list it is possible that one
of the drives is getting removed and its sas_target object is
freed but its sdev object remains intact.
Consequently, a kernel panic can occur while the driver is trying to access
the sas_address field of sas_target object without also checking the
sas_target object for NULL. |
| The OCPP implementation in libocpp before 0.26.2 allows a denial of service (EVerest crash) via JSON input larger than 255 characters, because a CiString<255> object is created with StringTooLarge set to Throw. |
| Envoy is a cloud-native, open-source edge and service proxy. In versions 1.29.0 and 1.29.1, theEnvoy HTTP/2 protocol stack is vulnerable to the flood of CONTINUATION frames. Envoy's HTTP/2 codec does not reset a request when header map limits have been exceeded. This allows an attacker to send an sequence of CONTINUATION frames without the END_HEADERS bit set causing unlimited memory consumption. This can lead to denial of service through memory exhaustion. Users should upgrade to versions 1.29.2 to mitigate the effects of the CONTINUATION flood. Note that this vulnerability is a regression in Envoy version 1.29.0 and 1.29.1 only. As a workaround, downgrade to version 1.28.1 or earlier or disable HTTP/2 protocol for downstream connections. |
| Envoy is a cloud-native, open source edge and service proxy. The HTTP/2 protocol stack in Envoy versions prior to 1.29.3, 1.28.2, 1.27.4, and 1.26.8 are vulnerable to CPU exhaustion due to flood of CONTINUATION frames. Envoy's HTTP/2 codec allows the client to send an unlimited number of CONTINUATION frames even after exceeding Envoy's header map limits. This allows an attacker to send a sequence of CONTINUATION frames without the END_HEADERS bit set causing CPU utilization, consuming approximately 1 core per 300Mbit/s of traffic and culminating in denial of service through CPU exhaustion. Users should upgrade to version 1.29.3, 1.28.2, 1.27.4, or 1.26.8 to mitigate the effects of the CONTINUATION flood. As a workaround, disable HTTP/2 protocol for downstream connections. |
| xorg-x11-server before 1.19.5 was vulnerable to integer overflow in (S)ProcXIBarrierReleasePointer functions allowing malicious X client to cause X server to crash or possibly execute arbitrary code. |
| xorg-x11-server before 1.19.5 was missing length validation in X-Resource extension allowing malicious X client to cause X server to crash or possibly execute arbitrary code. |
| xorg-x11-server before 1.19.5 was missing length validation in XFree86 VidModeExtension allowing malicious X client to cause X server to crash or possibly execute arbitrary code. |
| xorg-x11-server before 1.19.5 was missing length validation in XFree86 DRI extension allowing malicious X client to cause X server to crash or possibly execute arbitrary code. |
| xorg-x11-server before 1.19.5 had wrong extra length check in ProcXIChangeHierarchy function allowing malicious X client to cause X server to crash or possibly execute arbitrary code. |
| xorg-x11-server before 1.19.5 was missing length validation in XINERAMA extension allowing malicious X client to cause X server to crash or possibly execute arbitrary code. |
| xorg-x11-server before 1.19.5 was missing extra length validation in ProcEstablishConnection function allowing malicious X client to cause X server to crash or possibly execute arbitrary code. |
| xorg-x11-server before 1.19.5 was missing length validation in MIT-SCREEN-SAVER extension allowing malicious X client to cause X server to crash or possibly execute arbitrary code. |
