| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
HID: pidff: Fix null pointer dereference in pidff_find_fields
This function triggered a null pointer dereference if used to search for
a report that isn't implemented on the device. This happened both for
optional and required reports alike.
The same logic was applied to pidff_find_special_field and although
pidff_init_fields should return an error earlier if one of the required
reports is missing, future modifications could change this logic and
resurface this possible null pointer dereference again.
LKML bug report:
https://lore.kernel.org/all/CAL-gK7f5=R0nrrQdPtaZZr1fd-cdAMbDMuZ_NLA8vM0SX+nGSw@mail.gmail.com |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: handle amdgpu_cgs_create_device() errors in amd_powerplay_create()
Add error handling to propagate amdgpu_cgs_create_device() failures
to the caller. When amdgpu_cgs_create_device() fails, release hwmgr
and return -ENOMEM to prevent null pointer dereference.
[v1]->[v2]: Change error code from -EINVAL to -ENOMEM. Free hwmgr. |
| In the Linux kernel, the following vulnerability has been resolved:
pm: cpupower: bench: Prevent NULL dereference on malloc failure
If malloc returns NULL due to low memory, 'config' pointer can be NULL.
Add a check to prevent NULL dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-imx: Add check for spi_imx_setupxfer()
Add check for the return value of spi_imx_setupxfer().
spi_imx->rx and spi_imx->tx function pointer can be NULL when
spi_imx_setupxfer() return error, and make NULL pointer dereference.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Call trace:
0x0
spi_imx_pio_transfer+0x50/0xd8
spi_imx_transfer_one+0x18c/0x858
spi_transfer_one_message+0x43c/0x790
__spi_pump_transfer_message+0x238/0x5d4
__spi_sync+0x2b0/0x454
spi_write_then_read+0x11c/0x200 |
| In the Linux kernel, the following vulnerability has been resolved:
driver core: fix potential NULL pointer dereference in dev_uevent()
If userspace reads "uevent" device attribute at the same time as another
threads unbinds the device from its driver, change to dev->driver from a
valid pointer to NULL may result in crash. Fix this by using READ_ONCE()
when fetching the pointer, and take bus' drivers klist lock to make sure
driver instance will not disappear while we access it.
Use WRITE_ONCE() when setting the driver pointer to ensure there is no
tearing. |
| Sante PACS Server HTTP Content-Length Header Handling NULL Pointer Dereference Denial-of-Service Vulnerability. This vulnerability allows remote attackers to create a denial-of-service condition on affected installations of Sante PACS Server. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the handling of HTTP Content-Length header. The issue results from the lack of proper validation of a pointer prior to accessing it. An attacker can leverage this vulnerability to create a denial-of-service condition on the system. Was ZDI-CAN-26770. |
| openjpeg v 2.5.0 was discovered to contain a NULL pointer dereference via the component /openjp2/dwt.c. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: Fix NULL pointer dereference in core_scsi3_decode_spec_i_port()
The function core_scsi3_decode_spec_i_port(), in its error code path,
unconditionally calls core_scsi3_lunacl_undepend_item() passing the
dest_se_deve pointer, which may be NULL.
This can lead to a NULL pointer dereference if dest_se_deve remains
unset.
SPC-3 PR SPEC_I_PT: Unable to locate dest_tpg
Unable to handle kernel paging request at virtual address dfff800000000012
Call trace:
core_scsi3_lunacl_undepend_item+0x2c/0xf0 [target_core_mod] (P)
core_scsi3_decode_spec_i_port+0x120c/0x1c30 [target_core_mod]
core_scsi3_emulate_pro_register+0x6b8/0xcd8 [target_core_mod]
target_scsi3_emulate_pr_out+0x56c/0x840 [target_core_mod]
Fix this by adding a NULL check before calling
core_scsi3_lunacl_undepend_item() |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: carl9170: do not ping device which has failed to load firmware
Syzkaller reports [1, 2] crashes caused by an attempts to ping
the device which has failed to load firmware. Since such a device
doesn't pass 'ieee80211_register_hw()', an internal workqueue
managed by 'ieee80211_queue_work()' is not yet created and an
attempt to queue work on it causes null-ptr-deref.
[1] https://syzkaller.appspot.com/bug?extid=9a4aec827829942045ff
[2] https://syzkaller.appspot.com/bug?extid=0d8afba53e8fb2633217 |
| In the Linux kernel, the following vulnerability has been resolved:
net: If sock is dead don't access sock's sk_wq in sk_stream_wait_memory
Fixes the below NULL pointer dereference:
[...]
[ 14.471200] Call Trace:
[ 14.471562] <TASK>
[ 14.471882] lock_acquire+0x245/0x2e0
[ 14.472416] ? remove_wait_queue+0x12/0x50
[ 14.473014] ? _raw_spin_lock_irqsave+0x17/0x50
[ 14.473681] _raw_spin_lock_irqsave+0x3d/0x50
[ 14.474318] ? remove_wait_queue+0x12/0x50
[ 14.474907] remove_wait_queue+0x12/0x50
[ 14.475480] sk_stream_wait_memory+0x20d/0x340
[ 14.476127] ? do_wait_intr_irq+0x80/0x80
[ 14.476704] do_tcp_sendpages+0x287/0x600
[ 14.477283] tcp_bpf_push+0xab/0x260
[ 14.477817] tcp_bpf_sendmsg_redir+0x297/0x500
[ 14.478461] ? __local_bh_enable_ip+0x77/0xe0
[ 14.479096] tcp_bpf_send_verdict+0x105/0x470
[ 14.479729] tcp_bpf_sendmsg+0x318/0x4f0
[ 14.480311] sock_sendmsg+0x2d/0x40
[ 14.480822] ____sys_sendmsg+0x1b4/0x1c0
[ 14.481390] ? copy_msghdr_from_user+0x62/0x80
[ 14.482048] ___sys_sendmsg+0x78/0xb0
[ 14.482580] ? vmf_insert_pfn_prot+0x91/0x150
[ 14.483215] ? __do_fault+0x2a/0x1a0
[ 14.483738] ? do_fault+0x15e/0x5d0
[ 14.484246] ? __handle_mm_fault+0x56b/0x1040
[ 14.484874] ? lock_is_held_type+0xdf/0x130
[ 14.485474] ? find_held_lock+0x2d/0x90
[ 14.486046] ? __sys_sendmsg+0x41/0x70
[ 14.486587] __sys_sendmsg+0x41/0x70
[ 14.487105] ? intel_pmu_drain_pebs_core+0x350/0x350
[ 14.487822] do_syscall_64+0x34/0x80
[ 14.488345] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...]
The test scenario has the following flow:
thread1 thread2
----------- ---------------
tcp_bpf_sendmsg
tcp_bpf_send_verdict
tcp_bpf_sendmsg_redir sock_close
tcp_bpf_push_locked __sock_release
tcp_bpf_push //inet_release
do_tcp_sendpages sock->ops->release
sk_stream_wait_memory // tcp_close
sk_wait_event sk->sk_prot->close
release_sock(__sk);
***
lock_sock(sk);
__tcp_close
sock_orphan(sk)
sk->sk_wq = NULL
release_sock
****
lock_sock(__sk);
remove_wait_queue(sk_sleep(sk), &wait);
sk_sleep(sk)
//NULL pointer dereference
&rcu_dereference_raw(sk->sk_wq)->wait
While waiting for memory in thread1, the socket is released with its wait
queue because thread2 has closed it. This caused by tcp_bpf_send_verdict
didn't increase the f_count of psock->sk_redir->sk_socket->file in thread1.
We should check if SOCK_DEAD flag is set on wakeup in sk_stream_wait_memory
before accessing the wait queue. |
| In the Linux kernel, the following vulnerability has been resolved:
hugetlbfs: fix null-ptr-deref in hugetlbfs_parse_param()
Syzkaller reports a null-ptr-deref bug as follows:
======================================================
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:hugetlbfs_parse_param+0x1dd/0x8e0 fs/hugetlbfs/inode.c:1380
[...]
Call Trace:
<TASK>
vfs_parse_fs_param fs/fs_context.c:148 [inline]
vfs_parse_fs_param+0x1f9/0x3c0 fs/fs_context.c:129
vfs_parse_fs_string+0xdb/0x170 fs/fs_context.c:191
generic_parse_monolithic+0x16f/0x1f0 fs/fs_context.c:231
do_new_mount fs/namespace.c:3036 [inline]
path_mount+0x12de/0x1e20 fs/namespace.c:3370
do_mount fs/namespace.c:3383 [inline]
__do_sys_mount fs/namespace.c:3591 [inline]
__se_sys_mount fs/namespace.c:3568 [inline]
__x64_sys_mount+0x27f/0x300 fs/namespace.c:3568
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...]
</TASK>
======================================================
According to commit "vfs: parse: deal with zero length string value",
kernel will set the param->string to null pointer in vfs_parse_fs_string()
if fs string has zero length.
Yet the problem is that, hugetlbfs_parse_param() will dereference the
param->string, without checking whether it is a null pointer. To be more
specific, if hugetlbfs_parse_param() parses an illegal mount parameter,
such as "size=,", kernel will constructs struct fs_parameter with null
pointer in vfs_parse_fs_string(), then passes this struct fs_parameter to
hugetlbfs_parse_param(), which triggers the above null-ptr-deref bug.
This patch solves it by adding sanity check on param->string
in hugetlbfs_parse_param(). |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw-axi-dmac: do not print NULL LLI during error
During debugging we have seen an issue where axi_chan_dump_lli()
is passed a NULL LLI pointer which ends up causing an OOPS due
to trying to get fields from it. Simply print NULL LLI and exit
to avoid this. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: VMX: Do _all_ initialization before exposing /dev/kvm to userspace
Call kvm_init() only after _all_ setup is complete, as kvm_init() exposes
/dev/kvm to userspace and thus allows userspace to create VMs (and call
other ioctls). E.g. KVM will encounter a NULL pointer when attempting to
add a vCPU to the per-CPU loaded_vmcss_on_cpu list if userspace is able to
create a VM before vmx_init() configures said list.
BUG: kernel NULL pointer dereference, address: 0000000000000008
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] SMP
CPU: 6 PID: 1143 Comm: stable Not tainted 6.0.0-rc7+ #988
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:vmx_vcpu_load_vmcs+0x68/0x230 [kvm_intel]
<TASK>
vmx_vcpu_load+0x16/0x60 [kvm_intel]
kvm_arch_vcpu_load+0x32/0x1f0 [kvm]
vcpu_load+0x2f/0x40 [kvm]
kvm_arch_vcpu_create+0x231/0x310 [kvm]
kvm_vm_ioctl+0x79f/0xe10 [kvm]
? handle_mm_fault+0xb1/0x220
__x64_sys_ioctl+0x80/0xb0
do_syscall_64+0x2b/0x50
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7f5a6b05743b
</TASK>
Modules linked in: vhost_net vhost vhost_iotlb tap kvm_intel(+) kvm irqbypass |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: initialize device's zone info for seeding
When performing seeding on a zoned filesystem it is necessary to
initialize each zoned device's btrfs_zoned_device_info structure,
otherwise mounting the filesystem will cause a NULL pointer dereference.
This was uncovered by fstests' testcase btrfs/163. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: Fix WRITE_SAME No Data Buffer crash
In newer version of the SBC specs, we have a NDOB bit that indicates there
is no data buffer that gets written out. If this bit is set using commands
like "sg_write_same --ndob" we will crash in target_core_iblock/file's
execute_write_same handlers when we go to access the se_cmd->t_data_sg
because its NULL.
This patch adds a check for the NDOB bit in the common WRITE SAME code
because we don't support it. And, it adds a check for zero SG elements in
each handler in case the initiator tries to send a normal WRITE SAME with
no data buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Reject SEV{-ES} intra host migration if vCPU creation is in-flight
Reject migration of SEV{-ES} state if either the source or destination VM
is actively creating a vCPU, i.e. if kvm_vm_ioctl_create_vcpu() is in the
section between incrementing created_vcpus and online_vcpus. The bulk of
vCPU creation runs _outside_ of kvm->lock to allow creating multiple vCPUs
in parallel, and so sev_info.es_active can get toggled from false=>true in
the destination VM after (or during) svm_vcpu_create(), resulting in an
SEV{-ES} VM effectively having a non-SEV{-ES} vCPU.
The issue manifests most visibly as a crash when trying to free a vCPU's
NULL VMSA page in an SEV-ES VM, but any number of things can go wrong.
BUG: unable to handle page fault for address: ffffebde00000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
CPU: 227 UID: 0 PID: 64063 Comm: syz.5.60023 Tainted: G U O 6.15.0-smp-DEV #2 NONE
Tainted: [U]=USER, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.52.0-0 10/28/2024
RIP: 0010:constant_test_bit arch/x86/include/asm/bitops.h:206 [inline]
RIP: 0010:arch_test_bit arch/x86/include/asm/bitops.h:238 [inline]
RIP: 0010:_test_bit include/asm-generic/bitops/instrumented-non-atomic.h:142 [inline]
RIP: 0010:PageHead include/linux/page-flags.h:866 [inline]
RIP: 0010:___free_pages+0x3e/0x120 mm/page_alloc.c:5067
Code: <49> f7 06 40 00 00 00 75 05 45 31 ff eb 0c 66 90 4c 89 f0 4c 39 f0
RSP: 0018:ffff8984551978d0 EFLAGS: 00010246
RAX: 0000777f80000001 RBX: 0000000000000000 RCX: ffffffff918aeb98
RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffebde00000000
RBP: 0000000000000000 R08: ffffebde00000007 R09: 1ffffd7bc0000000
R10: dffffc0000000000 R11: fffff97bc0000001 R12: dffffc0000000000
R13: ffff8983e19751a8 R14: ffffebde00000000 R15: 1ffffd7bc0000000
FS: 0000000000000000(0000) GS:ffff89ee661d3000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffebde00000000 CR3: 000000793ceaa000 CR4: 0000000000350ef0
DR0: 0000000000000000 DR1: 0000000000000b5f DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
sev_free_vcpu+0x413/0x630 arch/x86/kvm/svm/sev.c:3169
svm_vcpu_free+0x13a/0x2a0 arch/x86/kvm/svm/svm.c:1515
kvm_arch_vcpu_destroy+0x6a/0x1d0 arch/x86/kvm/x86.c:12396
kvm_vcpu_destroy virt/kvm/kvm_main.c:470 [inline]
kvm_destroy_vcpus+0xd1/0x300 virt/kvm/kvm_main.c:490
kvm_arch_destroy_vm+0x636/0x820 arch/x86/kvm/x86.c:12895
kvm_put_kvm+0xb8e/0xfb0 virt/kvm/kvm_main.c:1310
kvm_vm_release+0x48/0x60 virt/kvm/kvm_main.c:1369
__fput+0x3e4/0x9e0 fs/file_table.c:465
task_work_run+0x1a9/0x220 kernel/task_work.c:227
exit_task_work include/linux/task_work.h:40 [inline]
do_exit+0x7f0/0x25b0 kernel/exit.c:953
do_group_exit+0x203/0x2d0 kernel/exit.c:1102
get_signal+0x1357/0x1480 kernel/signal.c:3034
arch_do_signal_or_restart+0x40/0x690 arch/x86/kernel/signal.c:337
exit_to_user_mode_loop kernel/entry/common.c:111 [inline]
exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
syscall_exit_to_user_mode+0x67/0xb0 kernel/entry/common.c:218
do_syscall_64+0x7c/0x150 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f87a898e969
</TASK>
Modules linked in: gq(O)
gsmi: Log Shutdown Reason 0x03
CR2: ffffebde00000000
---[ end trace 0000000000000000 ]---
Deliberately don't check for a NULL VMSA when freeing the vCPU, as crashing
the host is likely desirable due to the VMSA being consumed by hardware.
E.g. if KVM manages to allow VMRUN on the vCPU, hardware may read/write a
bogus VMSA page. Accessing P
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: u_serial: Fix race condition in TTY wakeup
A race condition occurs when gs_start_io() calls either gs_start_rx() or
gs_start_tx(), as those functions briefly drop the port_lock for
usb_ep_queue(). This allows gs_close() and gserial_disconnect() to clear
port.tty and port_usb, respectively.
Use the null-safe TTY Port helper function to wake up TTY.
Example
CPU1: CPU2:
gserial_connect() // lock
gs_close() // await lock
gs_start_rx() // unlock
usb_ep_queue()
gs_close() // lock, reset port.tty and unlock
gs_start_rx() // lock
tty_wakeup() // NPE |
| In the Linux kernel, the following vulnerability has been resolved:
atm: clip: Fix potential null-ptr-deref in to_atmarpd().
atmarpd is protected by RTNL since commit f3a0592b37b8 ("[ATM]: clip
causes unregister hang").
However, it is not enough because to_atmarpd() is called without RTNL,
especially clip_neigh_solicit() / neigh_ops->solicit() is unsleepable.
Also, there is no RTNL dependency around atmarpd.
Let's use a private mutex and RCU to protect access to atmarpd in
to_atmarpd(). |
| In the Linux kernel, the following vulnerability has been resolved:
atm: clip: Fix NULL pointer dereference in vcc_sendmsg()
atmarpd_dev_ops does not implement the send method, which may cause crash
as bellow.
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 0 P4D 0
Oops: Oops: 0010 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 5324 Comm: syz.0.0 Not tainted 6.15.0-rc6-syzkaller-00346-g5723cc3450bc #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
RSP: 0018:ffffc9000d3cf778 EFLAGS: 00010246
RAX: 1ffffffff1910dd1 RBX: 00000000000000c0 RCX: dffffc0000000000
RDX: ffffc9000dc82000 RSI: ffff88803e4c4640 RDI: ffff888052cd0000
RBP: ffffc9000d3cf8d0 R08: ffff888052c9143f R09: 1ffff1100a592287
R10: dffffc0000000000 R11: 0000000000000000 R12: 1ffff92001a79f00
R13: ffff888052cd0000 R14: ffff88803e4c4640 R15: ffffffff8c886e88
FS: 00007fbc762566c0(0000) GS:ffff88808d6c2000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffffffffd6 CR3: 0000000041f1b000 CR4: 0000000000352ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
vcc_sendmsg+0xa10/0xc50 net/atm/common.c:644
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg+0x219/0x270 net/socket.c:727
____sys_sendmsg+0x52d/0x830 net/socket.c:2566
___sys_sendmsg+0x21f/0x2a0 net/socket.c:2620
__sys_sendmmsg+0x227/0x430 net/socket.c:2709
__do_sys_sendmmsg net/socket.c:2736 [inline]
__se_sys_sendmmsg net/socket.c:2733 [inline]
__x64_sys_sendmmsg+0xa0/0xc0 net/socket.c:2733
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xf6/0x210 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: Return NULL when htb_lookup_leaf encounters an empty rbtree
htb_lookup_leaf has a BUG_ON that can trigger with the following:
tc qdisc del dev lo root
tc qdisc add dev lo root handle 1: htb default 1
tc class add dev lo parent 1: classid 1:1 htb rate 64bit
tc qdisc add dev lo parent 1:1 handle 2: netem
tc qdisc add dev lo parent 2:1 handle 3: blackhole
ping -I lo -c1 -W0.001 127.0.0.1
The root cause is the following:
1. htb_dequeue calls htb_dequeue_tree which calls the dequeue handler on
the selected leaf qdisc
2. netem_dequeue calls enqueue on the child qdisc
3. blackhole_enqueue drops the packet and returns a value that is not
just NET_XMIT_SUCCESS
4. Because of this, netem_dequeue calls qdisc_tree_reduce_backlog, and
since qlen is now 0, it calls htb_qlen_notify -> htb_deactivate ->
htb_deactiviate_prios -> htb_remove_class_from_row -> htb_safe_rb_erase
5. As this is the only class in the selected hprio rbtree,
__rb_change_child in __rb_erase_augmented sets the rb_root pointer to
NULL
6. Because blackhole_dequeue returns NULL, netem_dequeue returns NULL,
which causes htb_dequeue_tree to call htb_lookup_leaf with the same
hprio rbtree, and fail the BUG_ON
The function graph for this scenario is shown here:
0) | htb_enqueue() {
0) + 13.635 us | netem_enqueue();
0) 4.719 us | htb_activate_prios();
0) # 2249.199 us | }
0) | htb_dequeue() {
0) 2.355 us | htb_lookup_leaf();
0) | netem_dequeue() {
0) + 11.061 us | blackhole_enqueue();
0) | qdisc_tree_reduce_backlog() {
0) | qdisc_lookup_rcu() {
0) 1.873 us | qdisc_match_from_root();
0) 6.292 us | }
0) 1.894 us | htb_search();
0) | htb_qlen_notify() {
0) 2.655 us | htb_deactivate_prios();
0) 6.933 us | }
0) + 25.227 us | }
0) 1.983 us | blackhole_dequeue();
0) + 86.553 us | }
0) # 2932.761 us | qdisc_warn_nonwc();
0) | htb_lookup_leaf() {
0) | BUG_ON();
------------------------------------------
The full original bug report can be seen here [1].
We can fix this just by returning NULL instead of the BUG_ON,
as htb_dequeue_tree returns NULL when htb_lookup_leaf returns
NULL.
[1] https://lore.kernel.org/netdev/pF5XOOIim0IuEfhI-SOxTgRvNoDwuux7UHKnE_Y5-zVd4wmGvNk2ceHjKb8ORnzw0cGwfmVu42g9dL7XyJLf1NEzaztboTWcm0Ogxuojoeo=@willsroot.io/ |
