| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: acomp - Fix CFI failure due to type punning
To avoid a crash when control flow integrity is enabled, make the
workspace ("stream") free function use a consistent type, and call it
through a function pointer that has that same type. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: subpage: keep TOWRITE tag until folio is cleaned
btrfs_subpage_set_writeback() calls folio_start_writeback() the first time
a folio is written back, and it also clears the PAGECACHE_TAG_TOWRITE tag
even if there are still dirty blocks in the folio. This can break ordering
guarantees, such as those required by btrfs_wait_ordered_extents().
That ordering breakage leads to a real failure. For example, running
generic/464 on a zoned setup will hit the following ASSERT. This happens
because the broken ordering fails to flush existing dirty pages before the
file size is truncated.
assertion failed: !list_empty(&ordered->list) :: 0, in fs/btrfs/zoned.c:1899
------------[ cut here ]------------
kernel BUG at fs/btrfs/zoned.c:1899!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
CPU: 2 UID: 0 PID: 1906169 Comm: kworker/u130:2 Kdump: loaded Not tainted 6.16.0-rc6-BTRFS-ZNS+ #554 PREEMPT(voluntary)
Hardware name: Supermicro Super Server/H12SSL-NT, BIOS 2.0 02/22/2021
Workqueue: btrfs-endio-write btrfs_work_helper [btrfs]
RIP: 0010:btrfs_finish_ordered_zoned.cold+0x50/0x52 [btrfs]
RSP: 0018:ffffc9002efdbd60 EFLAGS: 00010246
RAX: 000000000000004c RBX: ffff88811923c4e0 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff827e38b1 RDI: 00000000ffffffff
RBP: ffff88810005d000 R08: 00000000ffffdfff R09: ffffffff831051c8
R10: ffffffff83055220 R11: 0000000000000000 R12: ffff8881c2458c00
R13: ffff88811923c540 R14: ffff88811923c5e8 R15: ffff8881c1bd9680
FS: 0000000000000000(0000) GS:ffff88a04acd0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f907c7a918c CR3: 0000000004024000 CR4: 0000000000350ef0
Call Trace:
<TASK>
? srso_return_thunk+0x5/0x5f
btrfs_finish_ordered_io+0x4a/0x60 [btrfs]
btrfs_work_helper+0xf9/0x490 [btrfs]
process_one_work+0x204/0x590
? srso_return_thunk+0x5/0x5f
worker_thread+0x1d6/0x3d0
? __pfx_worker_thread+0x10/0x10
kthread+0x118/0x230
? __pfx_kthread+0x10/0x10
ret_from_fork+0x205/0x260
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Consider process A calling writepages() with WB_SYNC_NONE. In zoned mode or
for compressed writes, it locks several folios for delalloc and starts
writing them out. Let's call the last locked folio folio X. Suppose the
write range only partially covers folio X, leaving some pages dirty.
Process A calls btrfs_subpage_set_writeback() when building a bio. This
function call clears the TOWRITE tag of folio X, whose size = 8K and
the block size = 4K. It is following state.
0 4K 8K
|/////|/////| (flag: DIRTY, tag: DIRTY)
<-----> Process A will write this range.
Now suppose process B concurrently calls writepages() with WB_SYNC_ALL. It
calls tag_pages_for_writeback() to tag dirty folios with
PAGECACHE_TAG_TOWRITE. Since folio X is still dirty, it gets tagged. Then,
B collects tagged folios using filemap_get_folios_tag() and must wait for
folio X to be written before returning from writepages().
0 4K 8K
|/////|/////| (flag: DIRTY, tag: DIRTY|TOWRITE)
However, between tagging and collecting, process A may call
btrfs_subpage_set_writeback() and clear folio X's TOWRITE tag.
0 4K 8K
| |/////| (flag: DIRTY|WRITEBACK, tag: DIRTY)
As a result, process B won't see folio X in its batch, and returns without
waiting for it. This breaks the WB_SYNC_ALL ordering requirement.
Fix this by using btrfs_subpage_set_writeback_keepwrite(), which retains
the TOWRITE tag. We now manually clear the tag only after the folio becomes
clean, via the xas operation. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/ext: Fix invalid task state transitions on class switch
When enabling a sched_ext scheduler, we may trigger invalid task state
transitions, resulting in warnings like the following (which can be
easily reproduced by running the hotplug selftest in a loop):
sched_ext: Invalid task state transition 0 -> 3 for fish[770]
WARNING: CPU: 18 PID: 787 at kernel/sched/ext.c:3862 scx_set_task_state+0x7c/0xc0
...
RIP: 0010:scx_set_task_state+0x7c/0xc0
...
Call Trace:
<TASK>
scx_enable_task+0x11f/0x2e0
switching_to_scx+0x24/0x110
scx_enable.isra.0+0xd14/0x13d0
bpf_struct_ops_link_create+0x136/0x1a0
__sys_bpf+0x1edd/0x2c30
__x64_sys_bpf+0x21/0x30
do_syscall_64+0xbb/0x370
entry_SYSCALL_64_after_hwframe+0x77/0x7f
This happens because we skip initialization for tasks that are already
dead (with their usage counter set to zero), but we don't exclude them
during the scheduling class transition phase.
Fix this by also skipping dead tasks during class swiching, preventing
invalid task state transitions. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Fix link speed calculation on retrain failure
When pcie_failed_link_retrain() fails to retrain, it tries to revert to the
previous link speed. However it calculates that speed from the Link
Control 2 register without masking out non-speed bits first.
PCIE_LNKCTL2_TLS2SPEED() converts such incorrect values to
PCI_SPEED_UNKNOWN (0xff), which in turn causes a WARN splat in
pcie_set_target_speed():
pci 0000:00:01.1: [1022:14ed] type 01 class 0x060400 PCIe Root Port
pci 0000:00:01.1: broken device, retraining non-functional downstream link at 2.5GT/s
pci 0000:00:01.1: retraining failed
WARNING: CPU: 1 PID: 1 at drivers/pci/pcie/bwctrl.c:168 pcie_set_target_speed
RDX: 0000000000000001 RSI: 00000000000000ff RDI: ffff9acd82efa000
pcie_failed_link_retrain
pci_device_add
pci_scan_single_device
Mask out the non-speed bits in PCIE_LNKCTL2_TLS2SPEED() and
PCIE_LNKCAP_SLS2SPEED() so they don't incorrectly return PCI_SPEED_UNKNOWN.
[bhelgaas: commit log, add details from https://lore.kernel.org/r/1c92ef6bcb314ee6977839b46b393282e4f52e74.1750684771.git.lukas@wunner.de] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/hisilicon/hibmc: fix irq_request()'s irq name variable is local
The local variable is passed in request_irq (), and there will be use
after free problem, which will make request_irq failed. Using the global
irq name instead of it to fix. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ad7173: fix channels index for syscalib_mode
Fix the index used to look up the channel when accessing the
syscalib_mode attribute. The address field is a 0-based index (same
as scan_index) that it used to access the channel in the
ad7173_channels array throughout the driver. The channels field, on
the other hand, may not match the address field depending on the
channel configuration specified in the device tree and could result
in an out-of-bounds access. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: x86/aegis - Add missing error checks
The skcipher_walk functions can allocate memory and can fail, so
checking for errors is necessary. |
| In the Linux kernel, the following vulnerability has been resolved:
dm: dm-crypt: Do not partially accept write BIOs with zoned targets
Read and write operations issued to a dm-crypt target may be split
according to the dm-crypt internal limits defined by the max_read_size
and max_write_size module parameters (default is 128 KB). The intent is
to improve processing time of large BIOs by splitting them into smaller
operations that can be parallelized on different CPUs.
For zoned dm-crypt targets, this BIO splitting is still done but without
the parallel execution to ensure that the issuing order of write
operations to the underlying devices remains sequential. However, the
splitting itself causes other problems:
1) Since dm-crypt relies on the block layer zone write plugging to
handle zone append emulation using regular write operations, the
reminder of a split write BIO will always be plugged into the target
zone write plugged. Once the on-going write BIO finishes, this
reminder BIO is unplugged and issued from the zone write plug work.
If this reminder BIO itself needs to be split, the reminder will be
re-issued and plugged again, but that causes a call to a
blk_queue_enter(), which may block if a queue freeze operation was
initiated. This results in a deadlock as DM submission still holds
BIOs that the queue freeze side is waiting for.
2) dm-crypt relies on the emulation done by the block layer using
regular write operations for processing zone append operations. This
still requires to properly return the written sector as the BIO
sector of the original BIO. However, this can be done correctly only
and only if there is a single clone BIO used for processing the
original zone append operation issued by the user. If the size of a
zone append operation is larger than dm-crypt max_write_size, then
the orginal BIO will be split and processed as a chain of regular
write operations. Such chaining result in an incorrect written sector
being returned to the zone append issuer using the original BIO
sector. This in turn results in file system data corruptions using
xfs or btrfs.
Fix this by modifying get_max_request_size() to always return the size
of the BIO to avoid it being split with dm_accpet_partial_bio() in
crypt_map(). get_max_request_size() is renamed to
get_max_request_sectors() to clarify the unit of the value returned
and its interface is changed to take a struct dm_target pointer and a
pointer to the struct bio being processed. In addition to this change,
to ensure that crypt_alloc_buffer() works correctly, set the dm-crypt
device max_hw_sectors limit to be at most
BIO_MAX_VECS << PAGE_SECTORS_SHIFT (1 MB with a 4KB page architecture).
This forces DM core to split write BIOs before passing them to
crypt_map(), and thus guaranteeing that dm-crypt can always accept an
entire write BIO without needing to split it.
This change does not have any effect on the read path of dm-crypt. Read
operations can still be split and the BIO fragments processed in
parallel. There is also no impact on the performance of the write path
given that all zone write BIOs were already processed inline instead of
in parallel.
This change also does not affect in any way regular dm-crypt block
devices. |
| In the Linux kernel, the following vulnerability has been resolved:
dm: Always split write BIOs to zoned device limits
Any zoned DM target that requires zone append emulation will use the
block layer zone write plugging. In such case, DM target drivers must
not split BIOs using dm_accept_partial_bio() as doing so can potentially
lead to deadlocks with queue freeze operations. Regular write operations
used to emulate zone append operations also cannot be split by the
target driver as that would result in an invalid writen sector value
return using the BIO sector.
In order for zoned DM target drivers to avoid such incorrect BIO
splitting, we must ensure that large BIOs are split before being passed
to the map() function of the target, thus guaranteeing that the
limits for the mapped device are not exceeded.
dm-crypt and dm-flakey are the only target drivers supporting zoned
devices and using dm_accept_partial_bio().
In the case of dm-crypt, this function is used to split BIOs to the
internal max_write_size limit (which will be suppressed in a different
patch). However, since crypt_alloc_buffer() uses a bioset allowing only
up to BIO_MAX_VECS (256) vectors in a BIO. The dm-crypt device
max_segments limit, which is not set and so default to BLK_MAX_SEGMENTS
(128), must thus be respected and write BIOs split accordingly.
In the case of dm-flakey, since zone append emulation is not required,
the block layer zone write plugging is not used and no splitting of BIOs
required.
Modify the function dm_zone_bio_needs_split() to use the block layer
helper function bio_needs_zone_write_plugging() to force a call to
bio_split_to_limits() in dm_split_and_process_bio(). This allows DM
target drivers to avoid using dm_accept_partial_bio() for write
operations on zoned DM devices. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath10k: shutdown driver when hardware is unreliable
In rare cases, ath10k may lose connection with the PCIe bus due to
some unknown reasons, which could further lead to system crashes during
resuming due to watchdog timeout:
ath10k_pci 0000:01:00.0: wmi command 20486 timeout, restarting hardware
ath10k_pci 0000:01:00.0: already restarting
ath10k_pci 0000:01:00.0: failed to stop WMI vdev 0: -11
ath10k_pci 0000:01:00.0: failed to stop vdev 0: -11
ieee80211 phy0: PM: **** DPM device timeout ****
Call Trace:
panic+0x125/0x315
dpm_watchdog_set+0x54/0x54
dpm_watchdog_handler+0x57/0x57
call_timer_fn+0x31/0x13c
At this point, all WMI commands will timeout and attempt to restart
device. So set a threshold for consecutive restart failures. If the
threshold is exceeded, consider the hardware is unreliable and all
ath10k operations should be skipped to avoid system crash.
fail_cont_count and pending_recovery are atomic variables, and
do not involve complex conditional logic. Therefore, even if recovery
check and reconfig complete are executed concurrently, the recovery
mechanism will not be broken.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00288-QCARMSWPZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Add error handling for krealloc in metadata setup
Function msm_ioctl_gem_info_set_metadata() now checks for krealloc
failure and returns -ENOMEM, avoiding potential NULL pointer dereference.
Explicitly avoids __GFP_NOFAIL due to deadlock risks and allocation constraints.
Patchwork: https://patchwork.freedesktop.org/patch/661235/ |
| In the Linux kernel, the following vulnerability has been resolved:
s390/ism: fix concurrency management in ism_cmd()
The s390x ISM device data sheet clearly states that only one
request-response sequence is allowable per ISM function at any point in
time. Unfortunately as of today the s390/ism driver in Linux does not
honor that requirement. This patch aims to rectify that.
This problem was discovered based on Aliaksei's bug report which states
that for certain workloads the ISM functions end up entering error state
(with PEC 2 as seen from the logs) after a while and as a consequence
connections handled by the respective function break, and for future
connection requests the ISM device is not considered -- given it is in a
dysfunctional state. During further debugging PEC 3A was observed as
well.
A kernel message like
[ 1211.244319] zpci: 061a:00:00.0: Event 0x2 reports an error for PCI function 0x61a
is a reliable indicator of the stated function entering error state
with PEC 2. Let me also point out that a kernel message like
[ 1211.244325] zpci: 061a:00:00.0: The ism driver bound to the device does not support error recovery
is a reliable indicator that the ISM function won't be auto-recovered
because the ISM driver currently lacks support for it.
On a technical level, without this synchronization, commands (inputs to
the FW) may be partially or fully overwritten (corrupted) by another CPU
trying to issue commands on the same function. There is hard evidence that
this can lead to DMB token values being used as DMB IOVAs, leading to
PEC 2 PCI events indicating invalid DMA. But this is only one of the
failure modes imaginable. In theory even completely losing one command
and executing another one twice and then trying to interpret the outputs
as if the command we intended to execute was actually executed and not
the other one is also possible. Frankly, I don't feel confident about
providing an exhaustive list of possible consequences. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix sleeping-in-atomic in ath11k_mac_op_set_bitrate_mask()
ath11k_mac_disable_peer_fixed_rate() is passed as the iterator to
ieee80211_iterate_stations_atomic(). Note in this case the iterator is
required to be atomic, however ath11k_mac_disable_peer_fixed_rate() does
not follow it as it might sleep. Consequently below warning is seen:
BUG: sleeping function called from invalid context at wmi.c:304
Call Trace:
<TASK>
dump_stack_lvl
__might_resched.cold
ath11k_wmi_cmd_send
ath11k_wmi_set_peer_param
ath11k_mac_disable_peer_fixed_rate
ieee80211_iterate_stations_atomic
ath11k_mac_op_set_bitrate_mask.cold
Change to ieee80211_iterate_stations_mtx() to fix this issue.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/arm-smmu-qcom: Add SM6115 MDSS compatible
Add the SM6115 MDSS compatible to clients compatible list, as it also
needs that workaround.
Without this workaround, for example, QRB4210 RB2 which is based on
SM4250/SM6115 generates a lot of smmu unhandled context faults during
boot:
arm_smmu_context_fault: 116854 callbacks suppressed
arm-smmu c600000.iommu: Unhandled context fault: fsr=0x402,
iova=0x5c0ec600, fsynr=0x320021, cbfrsynra=0x420, cb=5
arm-smmu c600000.iommu: FSR = 00000402 [Format=2 TF], SID=0x420
arm-smmu c600000.iommu: FSYNR0 = 00320021 [S1CBNDX=50 PNU PLVL=1]
arm-smmu c600000.iommu: Unhandled context fault: fsr=0x402,
iova=0x5c0d7800, fsynr=0x320021, cbfrsynra=0x420, cb=5
arm-smmu c600000.iommu: FSR = 00000402 [Format=2 TF], SID=0x420
and also failed initialisation of lontium lt9611uxc, gpu and dpu is
observed:
(binding MDSS components triggered by lt9611uxc have failed)
------------[ cut here ]------------
!aspace
WARNING: CPU: 6 PID: 324 at drivers/gpu/drm/msm/msm_gem_vma.c:130 msm_gem_vma_init+0x150/0x18c [msm]
Modules linked in: ... (long list of modules)
CPU: 6 UID: 0 PID: 324 Comm: (udev-worker) Not tainted 6.15.0-03037-gaacc73ceeb8b #4 PREEMPT
Hardware name: Qualcomm Technologies, Inc. QRB4210 RB2 (DT)
pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : msm_gem_vma_init+0x150/0x18c [msm]
lr : msm_gem_vma_init+0x150/0x18c [msm]
sp : ffff80008144b280
...
Call trace:
msm_gem_vma_init+0x150/0x18c [msm] (P)
get_vma_locked+0xc0/0x194 [msm]
msm_gem_get_and_pin_iova_range+0x4c/0xdc [msm]
msm_gem_kernel_new+0x48/0x160 [msm]
msm_gpu_init+0x34c/0x53c [msm]
adreno_gpu_init+0x1b0/0x2d8 [msm]
a6xx_gpu_init+0x1e8/0x9e0 [msm]
adreno_bind+0x2b8/0x348 [msm]
component_bind_all+0x100/0x230
msm_drm_bind+0x13c/0x3d0 [msm]
try_to_bring_up_aggregate_device+0x164/0x1d0
__component_add+0xa4/0x174
component_add+0x14/0x20
dsi_dev_attach+0x20/0x34 [msm]
dsi_host_attach+0x58/0x98 [msm]
devm_mipi_dsi_attach+0x34/0x90
lt9611uxc_attach_dsi.isra.0+0x94/0x124 [lontium_lt9611uxc]
lt9611uxc_probe+0x540/0x5fc [lontium_lt9611uxc]
i2c_device_probe+0x148/0x2a8
really_probe+0xbc/0x2c0
__driver_probe_device+0x78/0x120
driver_probe_device+0x3c/0x154
__driver_attach+0x90/0x1a0
bus_for_each_dev+0x68/0xb8
driver_attach+0x24/0x30
bus_add_driver+0xe4/0x208
driver_register+0x68/0x124
i2c_register_driver+0x48/0xcc
lt9611uxc_driver_init+0x20/0x1000 [lontium_lt9611uxc]
do_one_initcall+0x60/0x1d4
do_init_module+0x54/0x1fc
load_module+0x1748/0x1c8c
init_module_from_file+0x74/0xa0
__arm64_sys_finit_module+0x130/0x2f8
invoke_syscall+0x48/0x104
el0_svc_common.constprop.0+0xc0/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x2c/0x80
el0t_64_sync_handler+0x10c/0x138
el0t_64_sync+0x198/0x19c
---[ end trace 0000000000000000 ]---
msm_dpu 5e01000.display-controller: [drm:msm_gpu_init [msm]] *ERROR* could not allocate memptrs: -22
msm_dpu 5e01000.display-controller: failed to load adreno gpu
platform a400000.remoteproc:glink-edge:apr:service@7:dais: Adding to iommu group 19
msm_dpu 5e01000.display-controller: failed to bind 5900000.gpu (ops a3xx_ops [msm]): -22
msm_dpu 5e01000.display-controller: adev bind failed: -22
lt9611uxc 0-002b: failed to attach dsi to host
lt9611uxc 0-002b: probe with driver lt9611uxc failed with error -22 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix refcount leak causing resource not released
When ksmbd_conn_releasing(opinfo->conn) returns true,the refcount was not
decremented properly, causing a refcount leak that prevents the count from
reaching zero and the memory from being released. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: fix incorrect mpc_combine array size
[why]
MAX_SURFACES is per stream, while MAX_PLANES is per asic. The
mpc_combine is an array that records all the planes per asic. Therefore
MAX_PLANES should be used as the array size. Using MAX_SURFACES causes
array overflow when there are more than 3 planes.
[how]
Use the MAX_PLANES for the mpc_combine array size. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: avoid deadlock in fs reclaim with page writeback
Ext4 has a filesystem wide lock protecting ext4_writepages() calls to
avoid races with switching of journalled data flag or inode format. This
lock can however cause a deadlock like:
CPU0 CPU1
ext4_writepages()
percpu_down_read(sbi->s_writepages_rwsem);
ext4_change_inode_journal_flag()
percpu_down_write(sbi->s_writepages_rwsem);
- blocks, all readers block from now on
ext4_do_writepages()
ext4_init_io_end()
kmem_cache_zalloc(io_end_cachep, GFP_KERNEL)
fs_reclaim frees dentry...
dentry_unlink_inode()
iput() - last ref =>
iput_final() - inode dirty =>
write_inode_now()...
ext4_writepages() tries to acquire sbi->s_writepages_rwsem
and blocks forever
Make sure we cannot recurse into filesystem reclaim from writeback code
to avoid the deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: add NULL check in xfrm_update_ae_params
Normally, x->replay_esn and x->preplay_esn should be allocated at
xfrm_alloc_replay_state_esn(...) in xfrm_state_construct(...), hence the
xfrm_update_ae_params(...) is okay to update them. However, the current
implementation of xfrm_new_ae(...) allows a malicious user to directly
dereference a NULL pointer and crash the kernel like below.
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 8253067 P4D 8253067 PUD 8e0e067 PMD 0
Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI
CPU: 0 PID: 98 Comm: poc.npd Not tainted 6.4.0-rc7-00072-gdad9774deaf1 #8
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.o4
RIP: 0010:memcpy_orig+0xad/0x140
Code: e8 4c 89 5f e0 48 8d 7f e0 73 d2 83 c2 20 48 29 d6 48 29 d7 83 fa 10 72 34 4c 8b 06 4c 8b 4e 08 c
RSP: 0018:ffff888008f57658 EFLAGS: 00000202
RAX: 0000000000000000 RBX: ffff888008bd0000 RCX: ffffffff8238e571
RDX: 0000000000000018 RSI: ffff888007f64844 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff888008f57818
R13: ffff888007f64aa4 R14: 0000000000000000 R15: 0000000000000000
FS: 00000000014013c0(0000) GS:ffff88806d600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000054d8000 CR4: 00000000000006f0
Call Trace:
<TASK>
? __die+0x1f/0x70
? page_fault_oops+0x1e8/0x500
? __pfx_is_prefetch.constprop.0+0x10/0x10
? __pfx_page_fault_oops+0x10/0x10
? _raw_spin_unlock_irqrestore+0x11/0x40
? fixup_exception+0x36/0x460
? _raw_spin_unlock_irqrestore+0x11/0x40
? exc_page_fault+0x5e/0xc0
? asm_exc_page_fault+0x26/0x30
? xfrm_update_ae_params+0xd1/0x260
? memcpy_orig+0xad/0x140
? __pfx__raw_spin_lock_bh+0x10/0x10
xfrm_update_ae_params+0xe7/0x260
xfrm_new_ae+0x298/0x4e0
? __pfx_xfrm_new_ae+0x10/0x10
? __pfx_xfrm_new_ae+0x10/0x10
xfrm_user_rcv_msg+0x25a/0x410
? __pfx_xfrm_user_rcv_msg+0x10/0x10
? __alloc_skb+0xcf/0x210
? stack_trace_save+0x90/0xd0
? filter_irq_stacks+0x1c/0x70
? __stack_depot_save+0x39/0x4e0
? __kasan_slab_free+0x10a/0x190
? kmem_cache_free+0x9c/0x340
? netlink_recvmsg+0x23c/0x660
? sock_recvmsg+0xeb/0xf0
? __sys_recvfrom+0x13c/0x1f0
? __x64_sys_recvfrom+0x71/0x90
? do_syscall_64+0x3f/0x90
? entry_SYSCALL_64_after_hwframe+0x72/0xdc
? copyout+0x3e/0x50
netlink_rcv_skb+0xd6/0x210
? __pfx_xfrm_user_rcv_msg+0x10/0x10
? __pfx_netlink_rcv_skb+0x10/0x10
? __pfx_sock_has_perm+0x10/0x10
? mutex_lock+0x8d/0xe0
? __pfx_mutex_lock+0x10/0x10
xfrm_netlink_rcv+0x44/0x50
netlink_unicast+0x36f/0x4c0
? __pfx_netlink_unicast+0x10/0x10
? netlink_recvmsg+0x500/0x660
netlink_sendmsg+0x3b7/0x700
This Null-ptr-deref bug is assigned CVE-2023-3772. And this commit
adds additional NULL check in xfrm_update_ae_params to fix the NPD. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Make .remove and .shutdown HW shutdown consistent
Drivers' .remove and .shutdown callbacks are executed on different code
paths. The former is called when a device is removed from the bus, while
the latter is called at system shutdown time to quiesce the device.
This means that some overlap exists between the two, because both have to
take care of properly shutting down the hardware. But currently the logic
used in these two callbacks isn't consistent in msm drivers, which could
lead to kernel panic.
For example, on .remove the component is deleted and its .unbind callback
leads to the hardware being shutdown but only if the DRM device has been
marked as registered.
That check doesn't exist in the .shutdown logic and this can lead to the
driver calling drm_atomic_helper_shutdown() for a DRM device that hasn't
been properly initialized.
A situation like this can happen if drivers for expected sub-devices fail
to probe, since the .bind callback will never be executed. If that is the
case, drm_atomic_helper_shutdown() will attempt to take mutexes that are
only initialized if drm_mode_config_init() is called during a device bind.
This bug was attempted to be fixed in commit 623f279c7781 ("drm/msm: fix
shutdown hook in case GPU components failed to bind"), but unfortunately
it still happens in some cases as the one mentioned above, i.e:
systemd-shutdown[1]: Powering off.
kvm: exiting hardware virtualization
platform wifi-firmware.0: Removing from iommu group 12
platform video-firmware.0: Removing from iommu group 10
------------[ cut here ]------------
WARNING: CPU: 6 PID: 1 at drivers/gpu/drm/drm_modeset_lock.c:317 drm_modeset_lock_all_ctx+0x3c4/0x3d0
...
Hardware name: Google CoachZ (rev3+) (DT)
pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : drm_modeset_lock_all_ctx+0x3c4/0x3d0
lr : drm_modeset_lock_all_ctx+0x48/0x3d0
sp : ffff80000805bb80
x29: ffff80000805bb80 x28: ffff327c00128000 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000001 x24: ffffc95d820ec030
x23: ffff327c00bbd090 x22: ffffc95d8215eca0 x21: ffff327c039c5800
x20: ffff327c039c5988 x19: ffff80000805bbe8 x18: 0000000000000034
x17: 000000040044ffff x16: ffffc95d80cac920 x15: 0000000000000000
x14: 0000000000000315 x13: 0000000000000315 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : ffff80000805bc28 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : ffff327c00128000 x1 : 0000000000000000 x0 : ffff327c039c59b0
Call trace:
drm_modeset_lock_all_ctx+0x3c4/0x3d0
drm_atomic_helper_shutdown+0x70/0x134
msm_drv_shutdown+0x30/0x40
platform_shutdown+0x28/0x40
device_shutdown+0x148/0x350
kernel_power_off+0x38/0x80
__do_sys_reboot+0x288/0x2c0
__arm64_sys_reboot+0x28/0x34
invoke_syscall+0x48/0x114
el0_svc_common.constprop.0+0x44/0xec
do_el0_svc+0x2c/0xc0
el0_svc+0x2c/0x84
el0t_64_sync_handler+0x11c/0x150
el0t_64_sync+0x18c/0x190
---[ end trace 0000000000000000 ]---
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=000000010eab1000
[0000000000000018] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
...
Hardware name: Google CoachZ (rev3+) (DT)
pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : ww_mutex_lock+0x28/0x32c
lr : drm_modeset_lock_all_ctx+0x1b0/0x3d0
sp : ffff80000805bb50
x29: ffff80000805bb50 x28: ffff327c00128000 x27: 0000000000000000
x26: 00000
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: fix race in sock_map_free()
sock_map_free() calls release_sock(sk) without owning a reference
on the socket. This can cause use-after-free as syzbot found [1]
Jakub Sitnicki already took care of a similar issue
in sock_hash_free() in commit 75e68e5bf2c7 ("bpf, sockhash:
Synchronize delete from bucket list on map free")
[1]
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 0 PID: 3785 at lib/refcount.c:31 refcount_warn_saturate+0x17c/0x1a0 lib/refcount.c:31
Modules linked in:
CPU: 0 PID: 3785 Comm: kworker/u4:6 Not tainted 6.1.0-rc7-syzkaller-00103-gef4d3ea40565 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Workqueue: events_unbound bpf_map_free_deferred
RIP: 0010:refcount_warn_saturate+0x17c/0x1a0 lib/refcount.c:31
Code: 68 8b 31 c0 e8 75 71 15 fd 0f 0b e9 64 ff ff ff e8 d9 6e 4e fd c6 05 62 9c 3d 0a 01 48 c7 c7 80 bb 68 8b 31 c0 e8 54 71 15 fd <0f> 0b e9 43 ff ff ff 89 d9 80 e1 07 80 c1 03 38 c1 0f 8c a2 fe ff
RSP: 0018:ffffc9000456fb60 EFLAGS: 00010246
RAX: eae59bab72dcd700 RBX: 0000000000000004 RCX: ffff8880207057c0
RDX: 0000000000000000 RSI: 0000000000000201 RDI: 0000000000000000
RBP: 0000000000000004 R08: ffffffff816fdabd R09: fffff520008adee5
R10: fffff520008adee5 R11: 1ffff920008adee4 R12: 0000000000000004
R13: dffffc0000000000 R14: ffff88807b1c6c00 R15: 1ffff1100f638dcf
FS: 0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b30c30000 CR3: 000000000d08e000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__refcount_dec include/linux/refcount.h:344 [inline]
refcount_dec include/linux/refcount.h:359 [inline]
__sock_put include/net/sock.h:779 [inline]
tcp_release_cb+0x2d0/0x360 net/ipv4/tcp_output.c:1092
release_sock+0xaf/0x1c0 net/core/sock.c:3468
sock_map_free+0x219/0x2c0 net/core/sock_map.c:356
process_one_work+0x81c/0xd10 kernel/workqueue.c:2289
worker_thread+0xb14/0x1330 kernel/workqueue.c:2436
kthread+0x266/0x300 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
</TASK> |
