| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to do sanity check on node footer for non inode dnode
As syzbot reported below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/file.c:1243!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 5354 Comm: syz.0.0 Not tainted 6.17.0-rc1-syzkaller-00211-g90d970cade8e #0 PREEMPT(full)
RIP: 0010:f2fs_truncate_hole+0x69e/0x6c0 fs/f2fs/file.c:1243
Call Trace:
<TASK>
f2fs_punch_hole+0x2db/0x330 fs/f2fs/file.c:1306
f2fs_fallocate+0x546/0x990 fs/f2fs/file.c:2018
vfs_fallocate+0x666/0x7e0 fs/open.c:342
ksys_fallocate fs/open.c:366 [inline]
__do_sys_fallocate fs/open.c:371 [inline]
__se_sys_fallocate fs/open.c:369 [inline]
__x64_sys_fallocate+0xc0/0x110 fs/open.c:369
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f1e65f8ebe9
w/ a fuzzed image, f2fs may encounter panic due to it detects inconsistent
truncation range in direct node in f2fs_truncate_hole().
The root cause is: a non-inode dnode may has the same footer.ino and
footer.nid, so the dnode will be parsed as an inode, then ADDRS_PER_PAGE()
may return wrong blkaddr count which may be 923 typically, by chance,
dn.ofs_in_node is equal to 923, then count can be calculated to 0 in below
statement, later it will trigger panic w/ f2fs_bug_on(, count == 0 || ...).
count = min(end_offset - dn.ofs_in_node, pg_end - pg_start);
This patch introduces a new node_type NODE_TYPE_NON_INODE, then allowing
passing the new_type to sanity_check_node_footer in f2fs_get_node_folio()
to detect corruption that a non-inode dnode has the same footer.ino and
footer.nid.
Scripts to reproduce:
mkfs.f2fs -f /dev/vdb
mount /dev/vdb /mnt/f2fs
touch /mnt/f2fs/foo
touch /mnt/f2fs/bar
dd if=/dev/zero of=/mnt/f2fs/foo bs=1M count=8
umount /mnt/f2fs
inject.f2fs --node --mb i_nid --nid 4 --idx 0 --val 5 /dev/vdb
mount /dev/vdb /mnt/f2fs
xfs_io /mnt/f2fs/foo -c "fpunch 6984k 4k" |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: bpf: Only mitigate cBPF programs loaded by unprivileged users
Support for eBPF programs loaded by unprivileged users is typically
disabled. This means only cBPF programs need to be mitigated for BHB.
In addition, only mitigate cBPF programs that were loaded by an
unprivileged user. Privileged users can also load the same program
via eBPF, making the mitigation pointless. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: bpf: Add BHB mitigation to the epilogue for cBPF programs
A malicious BPF program may manipulate the branch history to influence
what the hardware speculates will happen next.
On exit from a BPF program, emit the BHB mititgation sequence.
This is only applied for 'classic' cBPF programs that are loaded by
seccomp. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Tear down vGIC on failed vCPU creation
If kvm_arch_vcpu_create() fails to share the vCPU page with the
hypervisor, we propagate the error back to the ioctl but leave the
vGIC vCPU data initialised. Note only does this leak the corresponding
memory when the vCPU is destroyed but it can also lead to use-after-free
if the redistributor device handling tries to walk into the vCPU.
Add the missing cleanup to kvm_arch_vcpu_create(), ensuring that the
vGIC vCPU structures are destroyed on error. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: disable sdma ecc irq only when sdma RAS is enabled in suspend
sdma_v4_0_ip is shared on a few asics, but in sdma_v4_0_hw_fini,
driver unconditionally disables ecc_irq which is only enabled on
those asics enabling sdma ecc. This will introduce a warning in
suspend cycle on those chips with sdma ip v4.0, while without
sdma ecc. So this patch correct this.
[ 7283.166354] RIP: 0010:amdgpu_irq_put+0x45/0x70 [amdgpu]
[ 7283.167001] RSP: 0018:ffff9a5fc3967d08 EFLAGS: 00010246
[ 7283.167019] RAX: ffff98d88afd3770 RBX: 0000000000000001 RCX: 0000000000000000
[ 7283.167023] RDX: 0000000000000000 RSI: ffff98d89da30390 RDI: ffff98d89da20000
[ 7283.167025] RBP: ffff98d89da20000 R08: 0000000000036838 R09: 0000000000000006
[ 7283.167028] R10: ffffd5764243c008 R11: 0000000000000000 R12: ffff98d89da30390
[ 7283.167030] R13: ffff98d89da38978 R14: ffffffff999ae15a R15: ffff98d880130105
[ 7283.167032] FS: 0000000000000000(0000) GS:ffff98d996f00000(0000) knlGS:0000000000000000
[ 7283.167036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7283.167039] CR2: 00000000f7a9d178 CR3: 00000001c42ea000 CR4: 00000000003506e0
[ 7283.167041] Call Trace:
[ 7283.167046] <TASK>
[ 7283.167048] sdma_v4_0_hw_fini+0x38/0xa0 [amdgpu]
[ 7283.167704] amdgpu_device_ip_suspend_phase2+0x101/0x1a0 [amdgpu]
[ 7283.168296] amdgpu_device_suspend+0x103/0x180 [amdgpu]
[ 7283.168875] amdgpu_pmops_freeze+0x21/0x60 [amdgpu]
[ 7283.169464] pci_pm_freeze+0x54/0xc0 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix integer overflow in amdgpu_cs_pass1
The type of size is unsigned int, if size is 0x40000000, there will
be an integer overflow, size will be zero after size *= sizeof(uint32_t),
will cause uninitialized memory to be referenced later. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/meson: explicitly remove aggregate driver at module unload time
Because component_master_del wasn't being called when unloading the
meson_drm module, the aggregate device would linger forever in the global
aggregate_devices list. That means when unloading and reloading the
meson_dw_hdmi module, component_add would call into
try_to_bring_up_aggregate_device and find the unbound meson_drm aggregate
device.
This would in turn dereference some of the aggregate_device's struct
entries which point to memory automatically freed by the devres API when
unbinding the aggregate device from meson_drv_unbind, and trigger an
use-after-free bug:
[ +0.000014] =============================================================
[ +0.000007] BUG: KASAN: use-after-free in find_components+0x468/0x500
[ +0.000017] Read of size 8 at addr ffff000006731688 by task modprobe/2536
[ +0.000018] CPU: 4 PID: 2536 Comm: modprobe Tainted: G C O 5.19.0-rc6-lrmbkasan+ #1
[ +0.000010] Hardware name: Hardkernel ODROID-N2Plus (DT)
[ +0.000008] Call trace:
[ +0.000005] dump_backtrace+0x1ec/0x280
[ +0.000011] show_stack+0x24/0x80
[ +0.000007] dump_stack_lvl+0x98/0xd4
[ +0.000010] print_address_description.constprop.0+0x80/0x520
[ +0.000011] print_report+0x128/0x260
[ +0.000007] kasan_report+0xb8/0xfc
[ +0.000007] __asan_report_load8_noabort+0x3c/0x50
[ +0.000009] find_components+0x468/0x500
[ +0.000008] try_to_bring_up_aggregate_device+0x64/0x390
[ +0.000009] __component_add+0x1dc/0x49c
[ +0.000009] component_add+0x20/0x30
[ +0.000008] meson_dw_hdmi_probe+0x28/0x34 [meson_dw_hdmi]
[ +0.000013] platform_probe+0xd0/0x220
[ +0.000008] really_probe+0x3ac/0xa80
[ +0.000008] __driver_probe_device+0x1f8/0x400
[ +0.000008] driver_probe_device+0x68/0x1b0
[ +0.000008] __driver_attach+0x20c/0x480
[ +0.000009] bus_for_each_dev+0x114/0x1b0
[ +0.000007] driver_attach+0x48/0x64
[ +0.000009] bus_add_driver+0x390/0x564
[ +0.000007] driver_register+0x1a8/0x3e4
[ +0.000009] __platform_driver_register+0x6c/0x94
[ +0.000007] meson_dw_hdmi_platform_driver_init+0x30/0x1000 [meson_dw_hdmi]
[ +0.000014] do_one_initcall+0xc4/0x2b0
[ +0.000008] do_init_module+0x154/0x570
[ +0.000010] load_module+0x1a78/0x1ea4
[ +0.000008] __do_sys_init_module+0x184/0x1cc
[ +0.000008] __arm64_sys_init_module+0x78/0xb0
[ +0.000008] invoke_syscall+0x74/0x260
[ +0.000008] el0_svc_common.constprop.0+0xcc/0x260
[ +0.000009] do_el0_svc+0x50/0x70
[ +0.000008] el0_svc+0x68/0x1a0
[ +0.000009] el0t_64_sync_handler+0x11c/0x150
[ +0.000009] el0t_64_sync+0x18c/0x190
[ +0.000014] Allocated by task 902:
[ +0.000007] kasan_save_stack+0x2c/0x5c
[ +0.000009] __kasan_kmalloc+0x90/0xd0
[ +0.000007] __kmalloc_node+0x240/0x580
[ +0.000010] memcg_alloc_slab_cgroups+0xa4/0x1ac
[ +0.000010] memcg_slab_post_alloc_hook+0xbc/0x4c0
[ +0.000008] kmem_cache_alloc_node+0x1d0/0x490
[ +0.000009] __alloc_skb+0x1d4/0x310
[ +0.000010] alloc_skb_with_frags+0x8c/0x620
[ +0.000008] sock_alloc_send_pskb+0x5ac/0x6d0
[ +0.000010] unix_dgram_sendmsg+0x2e0/0x12f0
[ +0.000010] sock_sendmsg+0xcc/0x110
[ +0.000007] sock_write_iter+0x1d0/0x304
[ +0.000008] new_sync_write+0x364/0x460
[ +0.000007] vfs_write+0x420/0x5ac
[ +0.000008] ksys_write+0x19c/0x1f0
[ +0.000008] __arm64_sys_write+0x78/0xb0
[ +0.000007] invoke_syscall+0x74/0x260
[ +0.000008] el0_svc_common.constprop.0+0x1a8/0x260
[ +0.000009] do_el0_svc+0x50/0x70
[ +0.000007] el0_svc+0x68/0x1a0
[ +0.000008] el0t_64_sync_handler+0x11c/0x150
[ +0.000008] el0t_64_sync+0x18c/0x190
[ +0.000013] Freed by task 2509:
[ +0.000008] kasan_save_stack+0x2c/0x5c
[ +0.000007] kasan_set_track+0x2c/0x40
[ +0.000008] kasan_set_free_info+0x28/0x50
[ +0.000008] ____kasan_slab_free+0x128/0x1d4
[ +0.000008] __kasan_slab_free+0x18/0x24
[ +0.000007] slab_free_freelist_hook+0x108/0x230
[ +0.000010]
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: fix oops in concurrently setting insn_emulation sysctls
emulation_proc_handler() changes table->data for proc_dointvec_minmax
and can generate the following Oops if called concurrently with itself:
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
| Internal error: Oops: 96000006 [#1] SMP
| Call trace:
| update_insn_emulation_mode+0xc0/0x148
| emulation_proc_handler+0x64/0xb8
| proc_sys_call_handler+0x9c/0xf8
| proc_sys_write+0x18/0x20
| __vfs_write+0x20/0x48
| vfs_write+0xe4/0x1d0
| ksys_write+0x70/0xf8
| __arm64_sys_write+0x20/0x28
| el0_svc_common.constprop.0+0x7c/0x1c0
| el0_svc_handler+0x2c/0xa0
| el0_svc+0x8/0x200
To fix this issue, keep the table->data as &insn->current_mode and
use container_of() to retrieve the insn pointer. Another mutex is
used to protect against the current_mode update but not for retrieving
insn_emulation as table->data is no longer changing. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-rdma: fix possible use-after-free in transport error_recovery work
While nvme_rdma_submit_async_event_work is checking the ctrl and queue
state before preparing the AER command and scheduling io_work, in order
to fully prevent a race where this check is not reliable the error
recovery work must flush async_event_work before continuing to destroy
the admin queue after setting the ctrl state to RESETTING such that
there is no race .submit_async_event and the error recovery handler
itself changing the ctrl state. |
| Malwarebytes 1.0.14 for Linux doesn't properly compute signatures in some scenarios. This allows a bypass of detection. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: core: fbcvt: avoid division by 0 in fb_cvt_hperiod()
In fb_find_mode_cvt(), iff mode->refresh somehow happens to be 0x80000000,
cvt.f_refresh will become 0 when multiplying it by 2 due to overflow. It's
then passed to fb_cvt_hperiod(), where it's used as a divider -- division
by 0 will result in kernel oops. Add a sanity check for cvt.f_refresh to
avoid such overflow...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
seg6: Fix validation of nexthop addresses
The kernel currently validates that the length of the provided nexthop
address does not exceed the specified length. This can lead to the
kernel reading uninitialized memory if user space provided a shorter
length than the specified one.
Fix by validating that the provided length exactly matches the specified
one. |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: remove ptp->n_vclocks check logic in ptp_vclock_in_use()
There is no disagreement that we should check both ptp->is_virtual_clock
and ptp->n_vclocks to check if the ptp virtual clock is in use.
However, when we acquire ptp->n_vclocks_mux to read ptp->n_vclocks in
ptp_vclock_in_use(), we observe a recursive lock in the call trace
starting from n_vclocks_store().
============================================
WARNING: possible recursive locking detected
6.15.0-rc6 #1 Not tainted
--------------------------------------------
syz.0.1540/13807 is trying to acquire lock:
ffff888035a24868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at:
ptp_vclock_in_use drivers/ptp/ptp_private.h:103 [inline]
ffff888035a24868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at:
ptp_clock_unregister+0x21/0x250 drivers/ptp/ptp_clock.c:415
but task is already holding lock:
ffff888030704868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at:
n_vclocks_store+0xf1/0x6d0 drivers/ptp/ptp_sysfs.c:215
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&ptp->n_vclocks_mux);
lock(&ptp->n_vclocks_mux);
*** DEADLOCK ***
....
============================================
The best way to solve this is to remove the logic that checks
ptp->n_vclocks in ptp_vclock_in_use().
The reason why this is appropriate is that any path that uses
ptp->n_vclocks must unconditionally check if ptp->n_vclocks is greater
than 0 before unregistering vclocks, and all functions are already
written this way. And in the function that uses ptp->n_vclocks, we
already get ptp->n_vclocks_mux before unregistering vclocks.
Therefore, we need to remove the redundant check for ptp->n_vclocks in
ptp_vclock_in_use() to prevent recursive locking. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: Fix NULL pointer deference on eir_get_service_data
The len parameter is considered optional so it can be NULL so it cannot
be used for skipping to next entry of EIR_SERVICE_DATA. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: sun8i-ce-cipher - fix error handling in sun8i_ce_cipher_prepare()
Fix two DMA cleanup issues on the error path in sun8i_ce_cipher_prepare():
1] If dma_map_sg() fails for areq->dst, the device driver would try to free
DMA memory it has not allocated in the first place. To fix this, on the
"theend_sgs" error path, call dma unmap only if the corresponding dma
map was successful.
2] If the dma_map_single() call for the IV fails, the device driver would
try to free an invalid DMA memory address on the "theend_iv" path:
------------[ cut here ]------------
DMA-API: sun8i-ce 1904000.crypto: device driver tries to free an invalid DMA memory address
WARNING: CPU: 2 PID: 69 at kernel/dma/debug.c:968 check_unmap+0x123c/0x1b90
Modules linked in: skcipher_example(O+)
CPU: 2 UID: 0 PID: 69 Comm: 1904000.crypto- Tainted: G O 6.15.0-rc3+ #24 PREEMPT
Tainted: [O]=OOT_MODULE
Hardware name: OrangePi Zero2 (DT)
pc : check_unmap+0x123c/0x1b90
lr : check_unmap+0x123c/0x1b90
...
Call trace:
check_unmap+0x123c/0x1b90 (P)
debug_dma_unmap_page+0xac/0xc0
dma_unmap_page_attrs+0x1f4/0x5fc
sun8i_ce_cipher_do_one+0x1bd4/0x1f40
crypto_pump_work+0x334/0x6e0
kthread_worker_fn+0x21c/0x438
kthread+0x374/0x664
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
To fix this, check for !dma_mapping_error() before calling
dma_unmap_single() on the "theend_iv" path. |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/skx_common: Fix general protection fault
After loading i10nm_edac (which automatically loads skx_edac_common), if
unload only i10nm_edac, then reload it and perform error injection testing,
a general protection fault may occur:
mce: [Hardware Error]: Machine check events logged
Oops: general protection fault ...
...
Workqueue: events mce_gen_pool_process
RIP: 0010:string+0x53/0xe0
...
Call Trace:
<TASK>
? die_addr+0x37/0x90
? exc_general_protection+0x1e7/0x3f0
? asm_exc_general_protection+0x26/0x30
? string+0x53/0xe0
vsnprintf+0x23e/0x4c0
snprintf+0x4d/0x70
skx_adxl_decode+0x16a/0x330 [skx_edac_common]
skx_mce_check_error.part.0+0xf8/0x220 [skx_edac_common]
skx_mce_check_error+0x17/0x20 [skx_edac_common]
...
The issue arose was because the variable 'adxl_component_count' (inside
skx_edac_common), which counts the ADXL components, was not reset. During
the reloading of i10nm_edac, the count was incremented by the actual number
of ADXL components again, resulting in a count that was double the real
number of ADXL components. This led to an out-of-bounds reference to the
ADXL component array, causing the general protection fault above.
Fix this issue by resetting the 'adxl_component_count' in adxl_put(),
which is called during the unloading of {skx,i10nm}_edac. |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Add cond_resched() to ftrace_graph_set_hash()
When the kernel contains a large number of functions that can be traced,
the loop in ftrace_graph_set_hash() may take a lot of time to execute.
This may trigger the softlockup watchdog.
Add cond_resched() within the loop to allow the kernel to remain
responsive even when processing a large number of functions.
This matches the cond_resched() that is used in other locations of the
code that iterates over all functions that can be traced. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Verify event formats that have "%*p.."
The trace event verifier checks the formats of trace events to make sure
that they do not point at memory that is not in the trace event itself or
in data that will never be freed. If an event references data that was
allocated when the event triggered and that same data is freed before the
event is read, then the kernel can crash by reading freed memory.
The verifier runs at boot up (or module load) and scans the print formats
of the events and checks their arguments to make sure that dereferenced
pointers are safe. If the format uses "%*p.." the verifier will ignore it,
and that could be dangerous. Cover this case as well.
Also add to the sample code a use case of "%*pbl". |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel: KVM: Mask PEBS_ENABLE loaded for guest with vCPU's value.
When generating the MSR_IA32_PEBS_ENABLE value that will be loaded on
VM-Entry to a KVM guest, mask the value with the vCPU's desired PEBS_ENABLE
value. Consulting only the host kernel's host vs. guest masks results in
running the guest with PEBS enabled even when the guest doesn't want to use
PEBS. Because KVM uses perf events to proxy the guest virtual PMU, simply
looking at exclude_host can't differentiate between events created by host
userspace, and events created by KVM on behalf of the guest.
Running the guest with PEBS unexpectedly enabled typically manifests as
crashes due to a near-infinite stream of #PFs. E.g. if the guest hasn't
written MSR_IA32_DS_AREA, the CPU will hit page faults on address '0' when
trying to record PEBS events.
The issue is most easily reproduced by running `perf kvm top` from before
commit 7b100989b4f6 ("perf evlist: Remove __evlist__add_default") (after
which, `perf kvm top` effectively stopped using PEBS). The userspace side
of perf creates a guest-only PEBS event, which intel_guest_get_msrs()
misconstrues a guest-*owned* PEBS event.
Arguably, this is a userspace bug, as enabling PEBS on guest-only events
simply cannot work, and userspace can kill VMs in many other ways (there
is no danger to the host). However, even if this is considered to be bad
userspace behavior, there's zero downside to perf/KVM restricting PEBS to
guest-owned events.
Note, commit 854250329c02 ("KVM: x86/pmu: Disable guest PEBS temporarily
in two rare situations") fixed the case where host userspace is profiling
KVM *and* userspace, but missed the case where userspace is profiling only
KVM. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: adjust subpage bit start based on sectorsize
When running machines with 64k page size and a 16k nodesize we started
seeing tree log corruption in production. This turned out to be because
we were not writing out dirty blocks sometimes, so this in fact affects
all metadata writes.
When writing out a subpage EB we scan the subpage bitmap for a dirty
range. If the range isn't dirty we do
bit_start++;
to move onto the next bit. The problem is the bitmap is based on the
number of sectors that an EB has. So in this case, we have a 64k
pagesize, 16k nodesize, but a 4k sectorsize. This means our bitmap is 4
bits for every node. With a 64k page size we end up with 4 nodes per
page.
To make this easier this is how everything looks
[0 16k 32k 48k ] logical address
[0 4 8 12 ] radix tree offset
[ 64k page ] folio
[ 16k eb ][ 16k eb ][ 16k eb ][ 16k eb ] extent buffers
[ | | | | | | | | | | | | | | | | ] bitmap
Now we use all of our addressing based on fs_info->sectorsize_bits, so
as you can see the above our 16k eb->start turns into radix entry 4.
When we find a dirty range for our eb, we correctly do bit_start +=
sectors_per_node, because if we start at bit 0, the next bit for the
next eb is 4, to correspond to eb->start 16k.
However if our range is clean, we will do bit_start++, which will now
put us offset from our radix tree entries.
In our case, assume that the first time we check the bitmap the block is
not dirty, we increment bit_start so now it == 1, and then we loop
around and check again. This time it is dirty, and we go to find that
start using the following equation
start = folio_start + bit_start * fs_info->sectorsize;
so in the case above, eb->start 0 is now dirty, and we calculate start
as
0 + 1 * fs_info->sectorsize = 4096
4096 >> 12 = 1
Now we're looking up the radix tree for 1, and we won't find an eb.
What's worse is now we're using bit_start == 1, so we do bit_start +=
sectors_per_node, which is now 5. If that eb is dirty we will run into
the same thing, we will look at an offset that is not populated in the
radix tree, and now we're skipping the writeout of dirty extent buffers.
The best fix for this is to not use sectorsize_bits to address nodes,
but that's a larger change. Since this is a fs corruption problem fix
it simply by always using sectors_per_node to increment the start bit. |
