| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in Cisco Nexus 9000 Series Fabric Switches in ACI mode could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to insufficient validation when processing specific Ethernet frames. An attacker could exploit this vulnerability by sending a crafted Ethernet frame to the management interface of an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition.
Note: Only the out-of-band (OOB) management interface is affected. |
| A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco Nexus 9000 Series Fabric Switches in ACI mode could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper processing when parsing SNMP requests. An attacker could exploit this vulnerability by continuously sending SNMP queries to a specific MIB of an affected device. A successful exploit could allow the attacker to cause a kernel panic on the device, resulting in a reload and a DoS condition.
Note: This vulnerability affects SNMP versions 1, 2c, and 3. To exploit this vulnerability through SNMPv1 or SNMPv2c, the attacker must have a valid read-only SNMP community string for the affected system. To exploit this vulnerability through SNMPv3, the attacker must have valid SNMP user credentials for the affected system. |
| A vulnerability with the Ethernet VPN (EVPN) Layer 2 ingress packet processing of Cisco Nexus 3600 Platform Switches and Cisco Nexus 9500-R Series Switching Platforms could allow an unauthenticated, adjacent attacker to trigger a Layer 2 traffic loop.
This vulnerability is due to a logic error when processing a crafted Layer 2 ingress frame. An attacker could exploit this vulnerability by sending a stream of crafted Ethernet frames through the targeted device. A successful exploit could allow the attacker to cause a Layer 2 Virtual eXtensible LAN (VxLAN) traffic loop, which, in turn, could result in a denial of service (DoS) condition. This Layer 2 loop could oversubscribe the bandwidth on network interfaces, which would result in all data plane traffic being dropped. To exploit this vulnerability, the attacker must be Layer 2-adjacent to the affected device.
Note: To stop active exploitation of this vulnerability, manual intervention is required to both stop the crafted traffic and flap all involved network interfaces. For additional assistance if a Layer 2 loop that is related to this vulnerability is suspected, contact the Cisco Technical Assistance Center (TAC) or the proper support provider. |
| A vulnerability in Cisco Catalyst SD-WAN Manager could allow an authenticated, local attacker with low privileges to gain root privileges on the underlying operating system.
This vulnerability is due to an insufficient user authentication mechanism in the REST API. An attacker could exploit this vulnerability by sending a request to the REST API of the affected system. A successful exploit could allow the attacker to gain root privileges on the underlying operating system. |
| A vulnerability in the Data Collection Agent (DCA) feature of Cisco Catalyst SD-WAN Manager could allow an authenticated, local attacker to gain DCA user privileges on an affected system. To exploit this vulnerability, the attacker must have valid vmanage credentials on the affected system.
This vulnerability is due to the presence of a credential file for the DCA user on an affected system. An attacker could exploit this vulnerability by accessing the filesystem as a low-privileged user and reading the file that contains the DCA password from that affected system. A successful exploit could allow the attacker to access another affected system and gain DCA user privileges.
Note: Cisco Catalyst SD-WAN Manager releases 20.18 and later are not affected by this vulnerability. |
| VMware Aria Operations contains a command injection vulnerability. A malicious unauthenticated actor may exploit this issue to execute arbitrary commands which may lead to remote code execution in VMware Aria Operations while support-assisted product migration is in progress.
To remediate CVE-2026-22719, apply the patches listed in the 'Fixed Version' column of the ' Response Matrix https://support.broadcom.com/web/ecx/support-content-notification/-/external/content/SecurityAdvisories/0/36947 ' in VMSA-2026-0001
Workarounds for CVE-2026-22719 are documented in the 'Workarounds' column of the ' Response Matrix https://support.broadcom.com/web/ecx/support-content-notification/-/external/content/SecurityAdvisories/0/36947 ' in VMSA-2026-0001 |
| VMware Aria Operations contains a stored cross-site scripting vulnerability. A malicious actor with privileges to create custom benchmarks may be able to inject script to perform administrative actions in VMware Aria Operations.
To remediate CVE-2026-22720, apply the patches listed in the 'Fixed Version' column of the 'Response Matrix' of VMSA-2026-0001 https://support.broadcom.com/web/ecx/support-content-notification/-/external/content/SecurityAdvisories/0/36947https:// . |
| LORIS (Longitudinal Online Research and Imaging System) is a self-hosted web application that provides data- and project-management for neuroimaging research. Starting in version 24.0.0 and prior to versions 26.0.5, 27.0.2, and 28.0.0, an authenticated user with the appropriate authorization can read configuration files on the server by exploiting a path traversal vulnerability. Some of these files contain hard-coded credentials. The vulnerability allows an attacker to read configuration files containing hard-coded credentials. The attacker could then authenticate to the database or other services if those credentials are reused. The attacker must be authenticated and have the required permissions. However, the vulnerability is easy to exploit and the application source code is public. This problem is fixed in LORIS v26.0.5 and v27.0.2 and above, and v28.0.0 and above. As a workaround, the electrophysiogy_browser in LORIS can be disabled by an administrator using the module manager. |
| mchange-commons-java, a library that provides Java utilities, includes code that mirrors early implementations of JNDI functionality, including support for remote `factoryClassLocation` values, by which code can be downloaded and invoked within a running application. If an attacker can provoke an application to read a maliciously crafted `jaxax.naming.Reference` or serialized object, they can provoke the download and execution of malicious code. Implementations of this functionality within the JDK were disabled by default behind a System property that defaults to `false`, `com.sun.jndi.ldap.object.trustURLCodebase`. However, since mchange-commons-java includes an independent implementation of JNDI derefencing, libraries (such as c3p0) that resolve references via that implementation could be provoked to download and execute malicious code even after the JDK was hardened. Mirroring the JDK patch, mchange-commons-java's JNDI functionality is gated by configuration parameters that default to restrictive values starting in version 0.4.0. No known workarounds are available. Versions prior to 0.4.0 should be avoided on application CLASSPATHs. |
| Zed, a code editor, has a Zip Slip (Path Traversal) vulnerability exists in its extension archive extraction functionality prior to version 0.224.4. The `extract_zip()` function in `crates/util/src/archive.rs` fails to validate ZIP entry filenames for path traversal sequences (e.g., `../`). This allows a malicious extension to write files outside its designated sandbox directory by downloading and extracting a crafted ZIP archive. Version 0.224.4 fixes the issue. |
| Vikunja is an open-source self-hosted task management platform. Prior to version 2.0.0, the restoreConfig function in vikunja/pkg/modules/dump/restore.go of the go-vikunja/vikunja repository fails to sanitize file paths within the provided ZIP archive. A maliciously crafted ZIP can bypass the intended extraction directory to overwrite arbitrary files on the host system. Additionally, we’ve discovered that a malformed archive triggers a runtime panic, crashing the process immediately after the database has been wiped permanently. The application trusts the metadata in the ZIP archive. It uses the Name attribute of the zip.File struct directly in os.OpenFile calls without validation, allowing files to be written outside the intended directory. The restoration logic assumes a specific directory structure within the ZIP. When provided with a "minimalist" malicious ZIP, the application fails to validate the length of slices derived from the archive contents. Specifically, at line 154, the code attempts to access an index of len(ms)-2 on an insufficiently populated slice, triggering a panic. Version 2.0.0 fixes the issue. |
| WPGraphQL provides a GraphQL API for WordPress sites. Prior to version 2.9.1, the `wp-graphql/wp-graphql` repository contains a GitHub Actions workflow (`release.yml`) vulnerable to OS command injection through direct use of `${{ github.event.pull_request.body }}` inside a `run:` shell block. When a pull request from `develop` to `master` is merged, the PR body is injected verbatim into a shell command, allowing arbitrary command execution on the Actions runner. Version 2.9.1 contains a fix for the vulnerability. |
| Agenta is an open-source LLMOps platform. In Agenta-API prior to version 0.48.1, a Python sandbox escape vulnerability existed in Agenta's custom code evaluator. Agenta used RestrictedPython as a sandboxing mechanism for user-supplied evaluator code, but incorrectly whitelisted the `numpy` package as safe within the sandbox. This allowed authenticated users to bypass the sandbox and achieve arbitrary code execution on the API server. The escape path was through `numpy.ma.core.inspect`, which exposes Python's introspection utilities — including `sys.modules` — thereby providing access to unfiltered system-level functionality like `os.system`. This vulnerability affects the Agenta self-hosted platform (API server), not the SDK when used as a standalone Python library. The custom code evaluator runs server-side within the API process. The issue is fixed in v0.48.1 by removing `numpy` from the sandbox allowlist. In later versions (v0.60+), the RestrictedPython sandbox was removed entirely and replaced with a different execution model. |
| Zed, a code editor, has an extension installer allows tar/gzip downloads. Prior to version 0.224.4, the tar extractor (`async_tar::Archive::unpack`) creates symlinks from the archive without validation, and the path guard (`writeable_path_from_extension`) only performs lexical prefix checks without resolving symlinks. An attacker can ship a tar that first creates a symlink inside the extension workdir pointing outside (e.g., `escape -> /`), then writes files through the symlink, causing writes to arbitrary host paths. This escapes the extension sandbox and enables code execution. Version 0.224.4 patches the issue. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in VeronaLabs WP SMS wp-sms allows SQL Injection.This issue affects WP SMS: from n/a through <= 6.9.12. |
| Deserialization of Untrusted Data vulnerability in Stylemix uListing ulisting allows Object Injection.This issue affects uListing: from n/a through <= 2.2.0. |
| Buffer overflow in parallel HNSW index build in pgvector 0.6.0 through 0.8.1 allows a database user to leak sensitive data from other relations or crash the database server. |
| Vikunja is an open-source self-hosted task management platform. Prior to version 2.0.0, the application allows users to upload SVG files as task attachments. SVG is an XML-based format that supports JavaScript execution through elements such as <script> tags or event handlers like onload. The application does not sanitize SVG content before storing it. When the uploaded SVG file is accessed via its direct URL, it is rendered inline in the browser under the application's origin. As a result, embedded JavaScript executes in the context of the authenticated user. Because the authentication token is stored in localStorage, it is accessible via JavaScript and can be retrieved by a malicious payload. Version 2.0.0 patches this issue. |
| Agenta is an open-source LLMOps platform. A Server-Side Template Injection (SSTI) vulnerability exists in versions prior to 0.86.8 in Agenta's API server evaluator template rendering. Although the vulnerable code lives in the SDK package, it is executed server-side within the API process when running evaluators. This does not affect standalone SDK usage — it only impacts self-hosted or managed Agenta platform deployments. Version 0.86.8 contains a fix for the issue. |
| Storybook is a frontend workshop for building user interface components and pages in isolation. Prior to versions 7.6.23, 8.6.17, 9.1.19, and 10.2.10, the WebSocket functionality in Storybook's dev server, used to create and update stories, is vulnerable to WebSocket hijacking. This vulnerability only affects the Storybook dev server; production builds are not impacted. Exploitation requires a developer to visit a malicious website while their local Storybook dev server is running. Because the WebSocket connection does not validate the origin of incoming connections, a malicious site can silently send WebSocket messages to the local instance without any further user interaction. If the Storybook dev server is intentionally exposed publicly (e.g. for design reviews or stakeholder demos) the risk is higher, as no malicious site visit is required. Any unauthenticated attacker can send WebSocket messages to it directly. The vulnerability affects the WebSocket message handlers for creating and saving stories. Both are vulnerable to injection via unsanitized input in the componentFilePath field, which can be exploited to achieve persistent XSS or Remote Code Execution (RCE). Versions 7.6.23, 8.6.17, 9.1.19, and 10.2.10 contain a fix for the issue. |
