Export limit exceeded: 331915 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (16262 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-54294 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix memleak of md thread In raid10_run(), if setup_conf() succeed and raid10_run() failed before setting 'mddev->thread', then in the error path 'conf->thread' is not freed. Fix the problem by setting 'mddev->thread' right after setup_conf(). | ||||
| CVE-2023-54295 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mtd: spi-nor: Fix shift-out-of-bounds in spi_nor_set_erase_type spi_nor_set_erase_type() was used either to set or to mask out an erase type. When we used it to mask out an erase type a shift-out-of-bounds was hit: UBSAN: shift-out-of-bounds in drivers/mtd/spi-nor/core.c:2237:24 shift exponent 4294967295 is too large for 32-bit type 'int' The setting of the size_{shift, mask} and of the opcode are unnecessary when the erase size is zero, as throughout the code just the erase size is considered to determine whether an erase type is supported or not. Setting the opcode to 0xFF was wrong too as nobody guarantees that 0xFF is an unused opcode. Thus when masking out an erase type, just set the erase size to zero. This will fix the shift-out-of-bounds. [ta: refine changes, new commit message, fix compilation error] | ||||
| CVE-2023-54296 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Get source vCPUs from source VM for SEV-ES intrahost migration Fix a goof where KVM tries to grab source vCPUs from the destination VM when doing intrahost migration. Grabbing the wrong vCPU not only hoses the guest, it also crashes the host due to the VMSA pointer being left NULL. BUG: unable to handle page fault for address: ffffe38687000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 39 PID: 17143 Comm: sev_migrate_tes Tainted: GO 6.5.0-smp--fff2e47e6c3b-next #151 Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.28.0 07/10/2023 RIP: 0010:__free_pages+0x15/0xd0 RSP: 0018:ffff923fcf6e3c78 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffe38687000000 RCX: 0000000000000100 RDX: 0000000000000100 RSI: 0000000000000000 RDI: ffffe38687000000 RBP: ffff923fcf6e3c88 R08: ffff923fcafb0000 R09: 0000000000000000 R10: 0000000000000000 R11: ffffffff83619b90 R12: ffff923fa9540000 R13: 0000000000080007 R14: ffff923f6d35d000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff929d0d7c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffe38687000000 CR3: 0000005224c34005 CR4: 0000000000770ee0 PKRU: 55555554 Call Trace: <TASK> sev_free_vcpu+0xcb/0x110 [kvm_amd] svm_vcpu_free+0x75/0xf0 [kvm_amd] kvm_arch_vcpu_destroy+0x36/0x140 [kvm] kvm_destroy_vcpus+0x67/0x100 [kvm] kvm_arch_destroy_vm+0x161/0x1d0 [kvm] kvm_put_kvm+0x276/0x560 [kvm] kvm_vm_release+0x25/0x30 [kvm] __fput+0x106/0x280 ____fput+0x12/0x20 task_work_run+0x86/0xb0 do_exit+0x2e3/0x9c0 do_group_exit+0xb1/0xc0 __x64_sys_exit_group+0x1b/0x20 do_syscall_64+0x41/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK> CR2: ffffe38687000000 | ||||
| CVE-2023-54297 | 1 Linux | 1 Linux Kernel | 2025-12-31 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: fix memory leak after finding block group with super blocks At exclude_super_stripes(), if we happen to find a block group that has super blocks mapped to it and we are on a zoned filesystem, we error out as this is not supposed to happen, indicating either a bug or maybe some memory corruption for example. However we are exiting the function without freeing the memory allocated for the logical address of the super blocks. Fix this by freeing the logical address. | ||||
| CVE-2023-54298 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: thermal: intel: quark_dts: fix error pointer dereference If alloc_soc_dts() fails, then we can just return. Trying to free "soc_dts" will lead to an Oops. | ||||
| CVE-2023-54299 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: bus: verify partner exists in typec_altmode_attention Some usb hubs will negotiate DisplayPort Alt mode with the device but will then negotiate a data role swap after entering the alt mode. The data role swap causes the device to unregister all alt modes, however the usb hub will still send Attention messages even after failing to reregister the Alt Mode. type_altmode_attention currently does not verify whether or not a device's altmode partner exists, which results in a NULL pointer error when dereferencing the typec_altmode and typec_altmode_ops belonging to the altmode partner. Verify the presence of a device's altmode partner before sending the Attention message to the Alt Mode driver. | ||||
| CVE-2023-54300 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: avoid referencing uninit memory in ath9k_wmi_ctrl_rx For the reasons also described in commit b383e8abed41 ("wifi: ath9k: avoid uninit memory read in ath9k_htc_rx_msg()"), ath9k_htc_rx_msg() should validate pkt_len before accessing the SKB. For example, the obtained SKB may have been badly constructed with pkt_len = 8. In this case, the SKB can only contain a valid htc_frame_hdr but after being processed in ath9k_htc_rx_msg() and passed to ath9k_wmi_ctrl_rx() endpoint RX handler, it is expected to have a WMI command header which should be located inside its data payload. Implement sanity checking inside ath9k_wmi_ctrl_rx(). Otherwise, uninit memory can be referenced. Tested on Qualcomm Atheros Communications AR9271 802.11n . Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||
| CVE-2023-54301 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: 8250_bcm7271: fix leak in `brcmuart_probe` Smatch reports: drivers/tty/serial/8250/8250_bcm7271.c:1120 brcmuart_probe() warn: 'baud_mux_clk' from clk_prepare_enable() not released on lines: 1032. The issue is fixed by using a managed clock. | ||||
| CVE-2023-54302 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix data race on CQP completion stats CQP completion statistics is read lockesly in irdma_wait_event and irdma_check_cqp_progress while it can be updated in the completion thread irdma_sc_ccq_get_cqe_info on another CPU as KCSAN reports. Make completion statistics an atomic variable to reflect coherent updates to it. This will also avoid load/store tearing logic bug potentially possible by compiler optimizations. [77346.170861] BUG: KCSAN: data-race in irdma_handle_cqp_op [irdma] / irdma_sc_ccq_get_cqe_info [irdma] [77346.171383] write to 0xffff8a3250b108e0 of 8 bytes by task 9544 on cpu 4: [77346.171483] irdma_sc_ccq_get_cqe_info+0x27a/0x370 [irdma] [77346.171658] irdma_cqp_ce_handler+0x164/0x270 [irdma] [77346.171835] cqp_compl_worker+0x1b/0x20 [irdma] [77346.172009] process_one_work+0x4d1/0xa40 [77346.172024] worker_thread+0x319/0x700 [77346.172037] kthread+0x180/0x1b0 [77346.172054] ret_from_fork+0x22/0x30 [77346.172136] read to 0xffff8a3250b108e0 of 8 bytes by task 9838 on cpu 2: [77346.172234] irdma_handle_cqp_op+0xf4/0x4b0 [irdma] [77346.172413] irdma_cqp_aeq_cmd+0x75/0xa0 [irdma] [77346.172592] irdma_create_aeq+0x390/0x45a [irdma] [77346.172769] irdma_rt_init_hw.cold+0x212/0x85d [irdma] [77346.172944] irdma_probe+0x54f/0x620 [irdma] [77346.173122] auxiliary_bus_probe+0x66/0xa0 [77346.173137] really_probe+0x140/0x540 [77346.173154] __driver_probe_device+0xc7/0x220 [77346.173173] driver_probe_device+0x5f/0x140 [77346.173190] __driver_attach+0xf0/0x2c0 [77346.173208] bus_for_each_dev+0xa8/0xf0 [77346.173225] driver_attach+0x29/0x30 [77346.173240] bus_add_driver+0x29c/0x2f0 [77346.173255] driver_register+0x10f/0x1a0 [77346.173272] __auxiliary_driver_register+0xbc/0x140 [77346.173287] irdma_init_module+0x55/0x1000 [irdma] [77346.173460] do_one_initcall+0x7d/0x410 [77346.173475] do_init_module+0x81/0x2c0 [77346.173491] load_module+0x1232/0x12c0 [77346.173506] __do_sys_finit_module+0x101/0x180 [77346.173522] __x64_sys_finit_module+0x3c/0x50 [77346.173538] do_syscall_64+0x39/0x90 [77346.173553] entry_SYSCALL_64_after_hwframe+0x63/0xcd [77346.173634] value changed: 0x0000000000000094 -> 0x0000000000000095 | ||||
| CVE-2023-54303 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Disable preemption in bpf_perf_event_output The nesting protection in bpf_perf_event_output relies on disabled preemption, which is guaranteed for kprobes and tracepoints. However bpf_perf_event_output can be also called from uprobes context through bpf_prog_run_array_sleepable function which disables migration, but keeps preemption enabled. This can cause task to be preempted by another one inside the nesting protection and lead eventually to two tasks using same perf_sample_data buffer and cause crashes like: kernel tried to execute NX-protected page - exploit attempt? (uid: 0) BUG: unable to handle page fault for address: ffffffff82be3eea ... Call Trace: ? __die+0x1f/0x70 ? page_fault_oops+0x176/0x4d0 ? exc_page_fault+0x132/0x230 ? asm_exc_page_fault+0x22/0x30 ? perf_output_sample+0x12b/0x910 ? perf_event_output+0xd0/0x1d0 ? bpf_perf_event_output+0x162/0x1d0 ? bpf_prog_c6271286d9a4c938_krava1+0x76/0x87 ? __uprobe_perf_func+0x12b/0x540 ? uprobe_dispatcher+0x2c4/0x430 ? uprobe_notify_resume+0x2da/0xce0 ? atomic_notifier_call_chain+0x7b/0x110 ? exit_to_user_mode_prepare+0x13e/0x290 ? irqentry_exit_to_user_mode+0x5/0x30 ? asm_exc_int3+0x35/0x40 Fixing this by disabling preemption in bpf_perf_event_output. | ||||
| CVE-2023-54304 | 1 Linux | 1 Linux Kernel | 2025-12-31 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: meson_sm: fix to avoid potential NULL pointer dereference of_match_device() may fail and returns a NULL pointer. Fix this by checking the return value of of_match_device. | ||||
| CVE-2023-54251 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: taprio: Limit TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME to INT_MAX. syzkaller found zero division error [0] in div_s64_rem() called from get_cycle_time_elapsed(), where sched->cycle_time is the divisor. We have tests in parse_taprio_schedule() so that cycle_time will never be 0, and actually cycle_time is not 0 in get_cycle_time_elapsed(). The problem is that the types of divisor are different; cycle_time is s64, but the argument of div_s64_rem() is s32. syzkaller fed this input and 0x100000000 is cast to s32 to be 0. @TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME={0xc, 0x8, 0x100000000} We use s64 for cycle_time to cast it to ktime_t, so let's keep it and set max for cycle_time. While at it, we prevent overflow in setup_txtime() and add another test in parse_taprio_schedule() to check if cycle_time overflows. Also, we add a new tdc test case for this issue. [0]: divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 1 PID: 103 Comm: kworker/1:3 Not tainted 6.5.0-rc1-00330-g60cc1f7d0605 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:div_s64_rem include/linux/math64.h:42 [inline] RIP: 0010:get_cycle_time_elapsed net/sched/sch_taprio.c:223 [inline] RIP: 0010:find_entry_to_transmit+0x252/0x7e0 net/sched/sch_taprio.c:344 Code: 3c 02 00 0f 85 5e 05 00 00 48 8b 4c 24 08 4d 8b bd 40 01 00 00 48 8b 7c 24 48 48 89 c8 4c 29 f8 48 63 f7 48 99 48 89 74 24 70 <48> f7 fe 48 29 d1 48 8d 04 0f 49 89 cc 48 89 44 24 20 49 8d 85 10 RSP: 0018:ffffc90000acf260 EFLAGS: 00010206 RAX: 177450e0347560cf RBX: 0000000000000000 RCX: 177450e0347560cf RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000100000000 RBP: 0000000000000056 R08: 0000000000000000 R09: ffffed10020a0934 R10: ffff8880105049a7 R11: ffff88806cf3a520 R12: ffff888010504800 R13: ffff88800c00d800 R14: ffff8880105049a0 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88806cf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0edf84f0e8 CR3: 000000000d73c002 CR4: 0000000000770ee0 PKRU: 55555554 Call Trace: <TASK> get_packet_txtime net/sched/sch_taprio.c:508 [inline] taprio_enqueue_one+0x900/0xff0 net/sched/sch_taprio.c:577 taprio_enqueue+0x378/0xae0 net/sched/sch_taprio.c:658 dev_qdisc_enqueue+0x46/0x170 net/core/dev.c:3732 __dev_xmit_skb net/core/dev.c:3821 [inline] __dev_queue_xmit+0x1b2f/0x3000 net/core/dev.c:4169 dev_queue_xmit include/linux/netdevice.h:3088 [inline] neigh_resolve_output net/core/neighbour.c:1552 [inline] neigh_resolve_output+0x4a7/0x780 net/core/neighbour.c:1532 neigh_output include/net/neighbour.h:544 [inline] ip6_finish_output2+0x924/0x17d0 net/ipv6/ip6_output.c:135 __ip6_finish_output+0x620/0xaa0 net/ipv6/ip6_output.c:196 ip6_finish_output net/ipv6/ip6_output.c:207 [inline] NF_HOOK_COND include/linux/netfilter.h:292 [inline] ip6_output+0x206/0x410 net/ipv6/ip6_output.c:228 dst_output include/net/dst.h:458 [inline] NF_HOOK.constprop.0+0xea/0x260 include/linux/netfilter.h:303 ndisc_send_skb+0x872/0xe80 net/ipv6/ndisc.c:508 ndisc_send_ns+0xb5/0x130 net/ipv6/ndisc.c:666 addrconf_dad_work+0xc14/0x13f0 net/ipv6/addrconf.c:4175 process_one_work+0x92c/0x13a0 kernel/workqueue.c:2597 worker_thread+0x60f/0x1240 kernel/workqueue.c:2748 kthread+0x2fe/0x3f0 kernel/kthread.c:389 ret_from_fork+0x2c/0x50 arch/x86/entry/entry_64.S:308 </TASK> Modules linked in: | ||||
| CVE-2023-54306 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: tls: avoid hanging tasks on the tx_lock syzbot sent a hung task report and Eric explains that adversarial receiver may keep RWIN at 0 for a long time, so we are not guaranteed to make forward progress. Thread which took tx_lock and went to sleep may not release tx_lock for hours. Use interruptible sleep where possible and reschedule the work if it can't take the lock. Testing: existing selftest passes | ||||
| CVE-2023-54307 | 1 Linux | 1 Linux Kernel | 2025-12-31 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ptp_qoriq: fix memory leak in probe() Smatch complains that: drivers/ptp/ptp_qoriq.c ptp_qoriq_probe() warn: 'base' from ioremap() not released. Fix this by revising the parameter from 'ptp_qoriq->base' to 'base'. This is only a bug if ptp_qoriq_init() returns on the first -ENODEV error path. For other error paths ptp_qoriq->base and base are the same. And this change makes the code more readable. | ||||
| CVE-2023-54308 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: ymfpci: Create card with device-managed snd_devm_card_new() snd_card_ymfpci_remove() was removed in commit c6e6bb5eab74 ("ALSA: ymfpci: Allocate resources with device-managed APIs"), but the call to snd_card_new() was not replaced with snd_devm_card_new(). Since there was no longer a call to snd_card_free, unloading the module would eventually result in Oops: [697561.532887] BUG: unable to handle page fault for address: ffffffffc0924480 [697561.532893] #PF: supervisor read access in kernel mode [697561.532896] #PF: error_code(0x0000) - not-present page [697561.532899] PGD ae1e15067 P4D ae1e15067 PUD ae1e17067 PMD 11a8f5067 PTE 0 [697561.532905] Oops: 0000 [#1] PREEMPT SMP NOPTI [697561.532909] CPU: 21 PID: 5080 Comm: wireplumber Tainted: G W OE 6.2.7 #1 [697561.532914] Hardware name: System manufacturer System Product Name/TUF GAMING X570-PLUS, BIOS 4408 10/28/2022 [697561.532916] RIP: 0010:try_module_get.part.0+0x1a/0xe0 [697561.532924] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 49 89 fc bf 01 00 00 00 e8 56 3c f8 ff <41> 83 3c 24 02 0f 84 96 00 00 00 41 8b 84 24 30 03 00 00 85 c0 0f [697561.532927] RSP: 0018:ffffbe9b858c3bd8 EFLAGS: 00010246 [697561.532930] RAX: ffff9815d14f1900 RBX: ffff9815c14e6000 RCX: 0000000000000000 [697561.532933] RDX: 0000000000000000 RSI: ffffffffc055092c RDI: ffffffffb3778c1a [697561.532935] RBP: ffffbe9b858c3be8 R08: 0000000000000040 R09: ffff981a1a741380 [697561.532937] R10: ffffbe9b858c3c80 R11: 00000009d56533a6 R12: ffffffffc0924480 [697561.532939] R13: ffff9823439d8500 R14: 0000000000000025 R15: ffff9815cd109f80 [697561.532942] FS: 00007f13084f1f80(0000) GS:ffff9824aef40000(0000) knlGS:0000000000000000 [697561.532945] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [697561.532947] CR2: ffffffffc0924480 CR3: 0000000145344000 CR4: 0000000000350ee0 [697561.532949] Call Trace: [697561.532951] <TASK> [697561.532955] try_module_get+0x13/0x30 [697561.532960] snd_ctl_open+0x61/0x1c0 [snd] [697561.532976] snd_open+0xb4/0x1e0 [snd] [697561.532989] chrdev_open+0xc7/0x240 [697561.532995] ? fsnotify_perm.part.0+0x6e/0x160 [697561.533000] ? __pfx_chrdev_open+0x10/0x10 [697561.533005] do_dentry_open+0x169/0x440 [697561.533009] vfs_open+0x2d/0x40 [697561.533012] path_openat+0xa9d/0x10d0 [697561.533017] ? debug_smp_processor_id+0x17/0x20 [697561.533022] ? trigger_load_balance+0x65/0x370 [697561.533026] do_filp_open+0xb2/0x160 [697561.533032] ? _raw_spin_unlock+0x19/0x40 [697561.533036] ? alloc_fd+0xa9/0x190 [697561.533040] do_sys_openat2+0x9f/0x160 [697561.533044] __x64_sys_openat+0x55/0x90 [697561.533048] do_syscall_64+0x3b/0x90 [697561.533052] entry_SYSCALL_64_after_hwframe+0x72/0xdc [697561.533056] RIP: 0033:0x7f1308a40db4 [697561.533059] Code: 24 20 eb 8f 66 90 44 89 54 24 0c e8 46 68 f8 ff 44 8b 54 24 0c 44 89 e2 48 89 ee 41 89 c0 bf 9c ff ff ff b8 01 01 00 00 0f 05 <48> 3d 00 f0 ff ff 77 32 44 89 c7 89 44 24 0c e8 78 68 f8 ff 8b 44 [697561.533062] RSP: 002b:00007ffcce664450 EFLAGS: 00000293 ORIG_RAX: 0000000000000101 [697561.533066] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f1308a40db4 [697561.533068] RDX: 0000000000080000 RSI: 00007ffcce664690 RDI: 00000000ffffff9c [697561.533070] RBP: 00007ffcce664690 R08: 0000000000000000 R09: 0000000000000012 [697561.533072] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000080000 [697561.533074] R13: 00007f13054b069b R14: 0000565209f83200 R15: 0000000000000000 [697561.533078] </TASK> | ||||
| CVE-2023-54309 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tpm: tpm_vtpm_proxy: fix a race condition in /dev/vtpmx creation /dev/vtpmx is made visible before 'workqueue' is initialized, which can lead to a memory corruption in the worst case scenario. Address this by initializing 'workqueue' as the very first step of the driver initialization. | ||||
| CVE-2023-54312 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: samples/bpf: Fix buffer overflow in tcp_basertt Using sizeof(nv) or strlen(nv)+1 is correct. | ||||
| CVE-2023-54313 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ovl: fix null pointer dereference in ovl_get_acl_rcu() Following process: P1 P2 path_openat link_path_walk may_lookup inode_permission(rcu) ovl_permission acl_permission_check check_acl get_cached_acl_rcu ovl_get_inode_acl realinode = ovl_inode_real(ovl_inode) drop_cache __dentry_kill(ovl_dentry) iput(ovl_inode) ovl_destroy_inode(ovl_inode) dput(oi->__upperdentry) dentry_kill(upperdentry) dentry_unlink_inode upperdentry->d_inode = NULL ovl_inode_upper upperdentry = ovl_i_dentry_upper(ovl_inode) d_inode(upperdentry) // returns NULL IS_POSIXACL(realinode) // NULL pointer dereference , will trigger an null pointer dereference at realinode: [ 205.472797] BUG: kernel NULL pointer dereference, address: 0000000000000028 [ 205.476701] CPU: 2 PID: 2713 Comm: ls Not tainted 6.3.0-12064-g2edfa098e750-dirty #1216 [ 205.478754] RIP: 0010:do_ovl_get_acl+0x5d/0x300 [ 205.489584] Call Trace: [ 205.489812] <TASK> [ 205.490014] ovl_get_inode_acl+0x26/0x30 [ 205.490466] get_cached_acl_rcu+0x61/0xa0 [ 205.490908] generic_permission+0x1bf/0x4e0 [ 205.491447] ovl_permission+0x79/0x1b0 [ 205.491917] inode_permission+0x15e/0x2c0 [ 205.492425] link_path_walk+0x115/0x550 [ 205.493311] path_lookupat.isra.0+0xb2/0x200 [ 205.493803] filename_lookup+0xda/0x240 [ 205.495747] vfs_fstatat+0x7b/0xb0 Fetch a reproducer in [Link]. Use the helper ovl_i_path_realinode() to get realinode and then do non-nullptr checking. | ||||
| CVE-2023-54318 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: use smc_lgr_list.lock to protect smc_lgr_list.list iterate in smcr_port_add While doing smcr_port_add, there maybe linkgroup add into or delete from smc_lgr_list.list at the same time, which may result kernel crash. So, use smc_lgr_list.lock to protect smc_lgr_list.list iterate in smcr_port_add. The crash calltrace show below: BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 0 PID: 559726 Comm: kworker/0:92 Kdump: loaded Tainted: G Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 449e491 04/01/2014 Workqueue: events smc_ib_port_event_work [smc] RIP: 0010:smcr_port_add+0xa6/0xf0 [smc] RSP: 0000:ffffa5a2c8f67de0 EFLAGS: 00010297 RAX: 0000000000000001 RBX: ffff9935e0650000 RCX: 0000000000000000 RDX: 0000000000000010 RSI: ffff9935e0654290 RDI: ffff9935c8560000 RBP: 0000000000000000 R08: 0000000000000000 R09: ffff9934c0401918 R10: 0000000000000000 R11: ffffffffb4a5c278 R12: ffff99364029aae4 R13: ffff99364029aa00 R14: 00000000ffffffed R15: ffff99364029ab08 FS: 0000000000000000(0000) GS:ffff994380600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000f06a10003 CR4: 0000000002770ef0 PKRU: 55555554 Call Trace: smc_ib_port_event_work+0x18f/0x380 [smc] process_one_work+0x19b/0x340 worker_thread+0x30/0x370 ? process_one_work+0x340/0x340 kthread+0x114/0x130 ? __kthread_cancel_work+0x50/0x50 ret_from_fork+0x1f/0x30 | ||||
| CVE-2023-54325 | 1 Linux | 1 Linux Kernel | 2025-12-31 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: qat - fix out-of-bounds read When preparing an AER-CTR request, the driver copies the key provided by the user into a data structure that is accessible by the firmware. If the target device is QAT GEN4, the key size is rounded up by 16 since a rounded up size is expected by the device. If the key size is rounded up before the copy, the size used for copying the key might be bigger than the size of the region containing the key, causing an out-of-bounds read. Fix by doing the copy first and then update the keylen. This is to fix the following warning reported by KASAN: [ 138.150574] BUG: KASAN: global-out-of-bounds in qat_alg_skcipher_init_com.isra.0+0x197/0x250 [intel_qat] [ 138.150641] Read of size 32 at addr ffffffff88c402c0 by task cryptomgr_test/2340 [ 138.150651] CPU: 15 PID: 2340 Comm: cryptomgr_test Not tainted 6.2.0-rc1+ #45 [ 138.150659] Hardware name: Intel Corporation ArcherCity/ArcherCity, BIOS EGSDCRB1.86B.0087.D13.2208261706 08/26/2022 [ 138.150663] Call Trace: [ 138.150668] <TASK> [ 138.150922] kasan_check_range+0x13a/0x1c0 [ 138.150931] memcpy+0x1f/0x60 [ 138.150940] qat_alg_skcipher_init_com.isra.0+0x197/0x250 [intel_qat] [ 138.151006] qat_alg_skcipher_init_sessions+0xc1/0x240 [intel_qat] [ 138.151073] crypto_skcipher_setkey+0x82/0x160 [ 138.151085] ? prepare_keybuf+0xa2/0xd0 [ 138.151095] test_skcipher_vec_cfg+0x2b8/0x800 | ||||