| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A Guard Tour VAPIX API parameter allowed the use of arbitrary values and can be incorrectly called, allowing an attacker to block access to the guard tour configuration page in the web interface of the Axis device. |
| Improper input validation in the user management function of web interface in Aten PE6208 2.3.228 and 2.4.232 allows remote authenticated users to cause a partial DoS of web interface via HTTP POST request. |
| Improper sanitization of the value of the 'srcset' attribute in AngularJS allows attackers to bypass common image source restrictions, which can also lead to a form of Content Spoofing https://owasp.org/www-community/attacks/Content_Spoofing .
This issue affects AngularJS versions 1.3.0-rc.4 and greater.
Note:
The AngularJS project is End-of-Life and will not receive any updates to address this issue. For more information see here https://docs.angularjs.org/misc/version-support-status . |
| An unauthenticated remote attacker can exploit input validation in cmd services of the devices, allowing them to disrupt system operations and potentially cause a denial-of-service. |
| Net::CIDR::Set versions 0.10 through 0.13 for Perl does not properly handle leading zero characters in IP CIDR address strings, which could allow attackers to bypass access control that is based on IP addresses.
Leading zeros are used to indicate octal numbers, which can confuse users who are intentionally using octal notation, as well as users who believe they are using decimal notation.
Net::CIDR::Set used code from Net::CIDR::Lite, which had a similar vulnerability CVE-2021-47154. |
| n affected platforms running Arista EOS, ACL policies may not be enforced. IPv4 ingress ACL, MAC ingress ACL, or IPv6 standard ingress ACL enabled on one or more ethernet or LAG interfaces may result in ACL policies not being enforced for ingress packets. This can cause incoming packets to incorrectly be allowed or denied. The two symptoms of this issue on the affected release and platform are:
* Packets which should be permitted may be dropped and,
* Packets which should be dropped may be permitted. |
| Mobile Security Framework (MobSF) is an automated, all-in-one mobile application (Android/iOS/Windows) pen-testing, malware analysis and security assessment framework. According to Apple's documentation for bundle ID's, it must contain only alphanumeric characters (A–Z, a–z, and 0–9), hyphens (-), and periods (.). However, an attacker can manually modify this value in the `Info.plist` file and add special characters to the `<key>CFBundleIdentifier</key>` value. When the application parses the wrong characters in the bundle ID, it encounters an error. As a result, it will not display content and will throw a 500 error instead. The only way to make the pages work again is to manually remove the malicious application from the system. This issue has been addressed in version 4.3.1 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| An issue has been discovered in GitLab affecting all versions before 16.2.0. Committing directories containing LF character results in 500 errors when viewing the commit. |
| Denial of Service in pipelines affecting all versions of Gitlab EE and CE prior to 16.2.8, 16.3 prior to 16.3.5, and 16.4 prior to 16.4.1 allows attacker to cause pipelines to fail. |
| An input validation issue in the asset proxy in GitLab EE, affecting all versions from 12.3 prior to 16.2.8, 16.3 prior to 16.3.5, and 16.4 prior to 16.4.1, allowed an authenticated attacker to craft image urls which bypass the asset proxy. |
| An issue has been discovered in GitLab EE affecting all versions starting before 16.4.4, all versions starting from 16.5 before 16.5.4, all versions starting from 16.6 before 16.6.2. It was possible to overflow the time spent on an issue that altered the details shown in the issue boards. |
| An issue has been discovered in GitLab CE/EE affecting all versions starting from 16.1 before 16.1.3, all versions starting from 16.2 before 16.2.2. An invalid 'start_sha' value on merge requests page may lead to Denial of Service as Changes tab would not load. |
| Kyverno is a policy engine designed for cloud native platform engineering teams. Prior to versions 1.13.5 and 1.14.0, it may happen that policy rules using namespace selector(s) in their match statements are mistakenly not applied during admission review request processing due to a missing error propagation in function `GetNamespaceSelectorsFromNamespaceLister` in `pkg/utils/engine/labels.go`. As a consequence, security-critical mutations and validations are bypassed, potentially allowing attackers with K8s API access to perform malicious operations. This issue has been patched in versions 1.13.5 and 1.14.0. |
| An Unchecked Input for Loop Condition in RT-Labs P-Net version 1.0.1 or earlier allows an attacker to cause IO devices that use the library to enter an infinite loop by sending a malicious RPC packet. |
| A lack of length validation in Snippet descriptions in GitLab CE/EE affecting all versions prior to 15.1.6, 15.2 prior to 15.2.4 and 15.3 prior to 15.3.2 allows an authenticated attacker to create a maliciously large Snippet which when requested with or without authentication places excessive load on the server, potential leading to Denial of Service. |
| NamelessMC is a free, easy to use & powerful website software for Minecraft servers. In version 2.1.4 and prior, the s parameter in GET requests for forum search functionality lacks length validation, allowing attackers to submit excessively long search queries. This oversight can lead to performance degradation and potential denial-of-service (DoS) attacks. This issue has been patched in version 2.2.0. |
| An Improper Validation of Syntactic Correctness of Input vulnerability in the kernel of Juniper Networks Junos OS Evolved on PTX series allows a network-based, unauthenticated attacker to cause a Denial of Service (DoS). When an incoming TCP packet destined to the device is malformed there is a possibility of a kernel panic. Only TCP packets destined to the ports for BGP, LDP and MSDP can trigger this. This issue only affects PTX10004, PTX10008, PTX10016. No other PTX Series devices or other platforms are affected. This issue affects Juniper Networks Junos OS Evolved: 20.4-EVO versions prior to 20.4R3-S4-EVO; 21.3-EVO versions prior to 21.3R3-EVO; 21.4-EVO versions prior to 21.4R3-EVO; 22.1-EVO versions prior to 22.1R2-EVO. This issue does not affect Juniper Networks Junos OS Evolved versions prior to 20.4R1-EVO. |
| An Improper Validation of Specified Index, Position, or Offset in Input vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows an unauthenticated network-based attacker to cause a Denial of Service (DoS). On SRX5000 Series with SPC3, SRX4000 Series, and vSRX, when PowerMode IPsec is configured and a malformed ESP packet matching an established IPsec tunnel is received the PFE crashes. This issue affects Juniper Networks Junos OS on SRX5000 Series with SPC3, SRX4000 Series, and vSRX: All versions prior to 19.4R2-S6, 19.4R3-S7; 20.1 versions prior to 20.1R3-S3; 20.2 versions prior to 20.2R3-S4; 20.3 versions prior to 20.3R3-S3; 20.4 versions prior to 20.4R3-S2; 21.1 versions prior to 21.1R3; 21.2 versions prior to 21.2R3; 21.3 versions prior to 21.3R1-S2, 21.3R2. |
| On QFX10000 Series devices using Juniper Networks Junos OS when configured as transit IP/MPLS penultimate hop popping (PHP) nodes with link aggregation group (LAG) interfaces, an Improper Validation of Specified Index, Position, or Offset in Input weakness allows an attacker sending certain IP packets to cause multiple interfaces in the LAG to detach causing a Denial of Service (DoS) condition. Continued receipt and processing of these packets will sustain the Denial of Service. This issue affects IPv4 and IPv6 packets. Packets of either type can cause and sustain the DoS event. These packets can be destined to the device or be transit packets. On devices such as the QFX10008 with line cards, line cards can be restarted to restore service. On devices such as the QFX10002 you can restart the PFE service, or reboot device to restore service. This issue affects: Juniper Networks Junos OS on QFX10000 Series: All versions prior to 15.1R7-S11; 18.4 versions prior to 18.4R2-S10, 18.4R3-S10; 19.1 versions prior to 19.1R3-S8; 19.2 versions prior to 19.2R3-S4; 19.3 versions prior to 19.3R3-S5; 19.4 versions prior to 19.4R2-S6, 19.4R3-S7; 20.1 versions prior to 20.1R3-S3; 20.2 versions prior to 20.2R3-S3; 20.3 versions prior to 20.3R3-S2; 20.4 versions prior to 20.4R3-S4; 21.1 versions prior to 21.1R3; 21.2 versions prior to 21.2R3-S3; 21.3 versions prior to 21.3R3-S1. An indicator of compromise may be seen by issuing the command: request pfe execute target fpc0 command "show jspec pechip[3] registers ps l2_node 10" timeout 0 | refresh 1 | no-more and reviewing for backpressured output; for example: GOT: 0x220702a8 pe.ps.l2_node[10].pkt_cnt 00000076 GOT: 0x220702b4 pe.ps.l2_node[10].backpressured 00000002 <<<< STICKS HERE and requesting detail on the pepic wanio: request pfe execute target fpc0 command "show pepic 0 wanio-info" timeout 0 | no-more | match xe-0/0/0:2 GOT: 3 xe-0/0/0:2 10 6 3 0 1 10 189 10 0x6321b088 <<< LOOK HERE as well as looking for tail drops looking at the interface queue, for example: show interfaces queue xe-0/0/0:2 resulting in: Transmitted: Total-dropped packets: 1094137 0 pps << LOOK HERE |
| An Improper Validation of Specified Type of Input vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS allows an attacker to cause an RPD memory leak leading to a Denial of Service (DoS). This memory leak only occurs when the attacker's packets are destined to any configured IPv6 address on the device. This issue affects: Juniper Networks Junos OS 21.1 versions prior to 21.1R3-S2; 21.2 versions prior to 21.2R3-S1; 21.3 versions prior to 21.3R3; 21.4 versions prior to 21.4R2; 22.1 versions prior to 22.1R2. This issue does not affect Juniper Networks Junos OS versions prior to 21.1R1. |
