| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Mattermost versions 11.3.x <= 11.3.0, 11.2.x <= 11.2.2, 10.11.x <= 10.11.10 fail to canonicalize IPv4-mapped IPv6 addresses before reserved IP validation which allows an attacker to perform SSRF attacks against internal services via IPv4-mapped IPv6 literals (e.g., [::ffff:127.0.0.1]).. Mattermost Advisory ID: MMSA-2026-00585 |
| Mattermost versions 11.3.x <= 11.3.0, 11.2.x <= 11.2.2, 10.11.x <= 10.11.10 fail to properly enforce read permissions in search API endpoints which allows guest users without read permissions to access posts and files in channels via search API requests. Mattermost Advisory ID: MMSA-2025-00554 |
| Mattermost versions 10.11.x <= 10.11.10 fail to validate user's authentication method when processing account auth type switch which allows an authenticated attacker to change account password without confirmation via falsely claiming a different auth provider.. Mattermost Advisory ID: MMSA-2026-00583 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: scarlett2: Fix buffer overflow in config retrieval
The scarlett2_usb_get_config() function has a logic error in the
endianness conversion code that can cause buffer overflows when
count > 1.
The code checks `if (size == 2)` where `size` is the total buffer size in
bytes, then loops `count` times treating each element as u16 (2 bytes).
This causes the loop to access `count * 2` bytes when the buffer only
has `size` bytes allocated.
Fix by checking the element size (config_item->size) instead of the
total buffer size. This ensures the endianness conversion matches the
actual element type. |
| Mattermost versions 11.3.x <= 11.3.0, 11.2.x <= 11.2.2, 10.11.x <= 10.11.10 fail to use consistent error responses when handling the /mute command which allows an authenticated team member to enumerate private channels they are not authorized to know about via differing error messages for nonexistent versus private channels. Mattermost Advisory ID: MMSA-2026-00588 |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: cdev: Fix resource leaks on errors in lineinfo_changed_notify()
On error handling paths, lineinfo_changed_notify() doesn't free the
allocated resources which results leaks. Fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
can: mcba_usb: mcba_usb_read_bulk_callback(): fix URB memory leak
Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb:
gs_usb_receive_bulk_callback(): fix URB memory leak").
In mcba_usb_probe() -> mcba_usb_start(), the URBs for USB-in transfers are
allocated, added to the priv->rx_submitted anchor and submitted. In the
complete callback mcba_usb_read_bulk_callback(), the URBs are processed and
resubmitted. In mcba_usb_close() -> mcba_urb_unlink() the URBs are freed by
calling usb_kill_anchored_urbs(&priv->rx_submitted).
However, this does not take into account that the USB framework unanchors
the URB before the complete function is called. This means that once an
in-URB has been completed, it is no longer anchored and is ultimately not
released in usb_kill_anchored_urbs().
Fix the memory leak by anchoring the URB in the
mcba_usb_read_bulk_callback()to the priv->rx_submitted anchor. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: fix inverted genmask check in nft_map_catchall_activate()
nft_map_catchall_activate() has an inverted element activity check
compared to its non-catchall counterpart nft_mapelem_activate() and
compared to what is logically required.
nft_map_catchall_activate() is called from the abort path to re-activate
catchall map elements that were deactivated during a failed transaction.
It should skip elements that are already active (they don't need
re-activation) and process elements that are inactive (they need to be
restored). Instead, the current code does the opposite: it skips inactive
elements and processes active ones.
Compare the non-catchall activate callback, which is correct:
nft_mapelem_activate():
if (nft_set_elem_active(ext, iter->genmask))
return 0; /* skip active, process inactive */
With the buggy catchall version:
nft_map_catchall_activate():
if (!nft_set_elem_active(ext, genmask))
continue; /* skip inactive, process active */
The consequence is that when a DELSET operation is aborted,
nft_setelem_data_activate() is never called for the catchall element.
For NFT_GOTO verdict elements, this means nft_data_hold() is never
called to restore the chain->use reference count. Each abort cycle
permanently decrements chain->use. Once chain->use reaches zero,
DELCHAIN succeeds and frees the chain while catchall verdict elements
still reference it, resulting in a use-after-free.
This is exploitable for local privilege escalation from an unprivileged
user via user namespaces + nftables on distributions that enable
CONFIG_USER_NS and CONFIG_NF_TABLES.
Fix by removing the negation so the check matches nft_mapelem_activate():
skip active elements, process inactive ones. |
| This is an uncontrolled resource consumption vulnerability (CWE-400) that can lead to Denial of Service (DoS).
In vulnerable Undici versions, when interceptors.deduplicate() is enabled, response data for deduplicated requests could be accumulated in memory for downstream handlers. An attacker-controlled or untrusted upstream endpoint can exploit this with large/chunked responses and concurrent identical requests, causing high memory usage and potential OOM process termination.
Impacted users are applications that use Undici’s deduplication interceptor against endpoints that may produce large or long-lived response bodies.
PatchesThe issue has been patched by changing deduplication behavior to stream response chunks to downstream handlers as they arrive (instead of full-body accumulation), and by preventing late deduplication when body streaming has already started.
Users should upgrade to the first official Undici (and Node.js, where applicable) releases that include this patch. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: server: fix leak of active_num_conn in ksmbd_tcp_new_connection()
On kthread_run() failure in ksmbd_tcp_new_connection(), the transport is
freed via free_transport(), which does not decrement active_num_conn,
leaking this counter.
Replace free_transport() with ksmbd_tcp_disconnect(). |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: virtio - Add spinlock protection with virtqueue notification
When VM boots with one virtio-crypto PCI device and builtin backend,
run openssl benchmark command with multiple processes, such as
openssl speed -evp aes-128-cbc -engine afalg -seconds 10 -multi 32
openssl processes will hangup and there is error reported like this:
virtio_crypto virtio0: dataq.0:id 3 is not a head!
It seems that the data virtqueue need protection when it is handled
for virtio done notification. If the spinlock protection is added
in virtcrypto_done_task(), openssl benchmark with multiple processes
works well. |
| Apollo Server is an open-source, spec-compliant GraphQL server that's compatible with any GraphQL client, including Apollo Client. In versions from 2.0.0 to 3.13.0, 4.2.0 to before 4.13.0, and 5.0.0 to before 5.4.0, the default configuration of startStandaloneServer from @apollo/server/standalone is vulnerable to denial of service (DoS) attacks through specially crafted request bodies with exotic character set encodings. This issue does not affect users that use @apollo/server as a dependency for integration packages, like @as-integrations/express5 or @as-integrations/next, only direct usage of startStandaloneServer. |
| OpenSift is an AI study tool that sifts through large datasets using semantic search and generative AI. Prior to version 1.6.3-alpha, the URL ingest pipeline accepted user-controlled remote URLs with incomplete destination restrictions. Although private/local host checks existed, missing restrictions for credentialed URLs, non-standard ports, and cross-host redirects left SSRF-class abuse paths in non-localhost deployments. This issue has been patched in version 1.6.3-alpha. |
| In the Linux kernel, the following vulnerability has been resolved:
migrate: correct lock ordering for hugetlb file folios
Syzbot has found a deadlock (analyzed by Lance Yang):
1) Task (5749): Holds folio_lock, then tries to acquire i_mmap_rwsem(read lock).
2) Task (5754): Holds i_mmap_rwsem(write lock), then tries to acquire
folio_lock.
migrate_pages()
-> migrate_hugetlbs()
-> unmap_and_move_huge_page() <- Takes folio_lock!
-> remove_migration_ptes()
-> __rmap_walk_file()
-> i_mmap_lock_read() <- Waits for i_mmap_rwsem(read lock)!
hugetlbfs_fallocate()
-> hugetlbfs_punch_hole() <- Takes i_mmap_rwsem(write lock)!
-> hugetlbfs_zero_partial_page()
-> filemap_lock_hugetlb_folio()
-> filemap_lock_folio()
-> __filemap_get_folio <- Waits for folio_lock!
The migration path is the one taking locks in the wrong order according to
the documentation at the top of mm/rmap.c. So expand the scope of the
existing i_mmap_lock to cover the calls to remove_migration_ptes() too.
This is (mostly) how it used to be after commit c0d0381ade79. That was
removed by 336bf30eb765 for both file & anon hugetlb pages when it should
only have been removed for anon hugetlb pages. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| A flaw was found in Pagure's rendering engine for reStructuredText (RST) files. An authenticated user can exploit an unrestricted `.. include::` directive within RST files to read arbitrary internal files from the server hosting Pagure. This information disclosure vulnerability allows unauthorized access to sensitive data on the server. |
| The extension fails to properly define allowed classes used when deserializing transport failure metadata. An attacker may exploit this to execute untrusted serialized code. Note that an active exploit requires write access to the directory configured at $GLOBALS['TYPO3_CONF_VARS']['MAIL']['transport_spool_filepath']. |
| The extension fails to verify, if an authenticated user has permissions to access to redirects resulting in exposure of redirect records when editing a page. |
| The extension fails to properly reset the generated MFA code after successful authentication. This leads to a possible MFA bypass for future login attempts by providing an empty string as MFA code to the extensions MFA provider. |
| In the Linux kernel, the following vulnerability has been resolved:
audit: add missing syscalls to read class
The "at" variant of getxattr() and listxattr() are missing from the
audit read class. Calling getxattrat() or listxattrat() on a file to
read its extended attributes will bypass audit rules such as:
-w /tmp/test -p rwa -k test_rwa
The current patch adds missing syscalls to the audit read class. |
