| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
perf/dwc_pcie: fix duplicate pci_dev devices
During platform_device_register, wrongly using struct device
pci_dev as platform_data caused a kmemdup copy of pci_dev. Worse
still, accessing the duplicated device leads to list corruption as its
mutex content (e.g., list, magic) remains the same as the original. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix memory leak in ath12k_pci_remove()
Kmemleak reported this error:
unreferenced object 0xffff1c165cec3060 (size 32):
comm "insmod", pid 560, jiffies 4296964570 (age 235.596s)
backtrace:
[<000000005434db68>] __kmem_cache_alloc_node+0x1f4/0x2c0
[<000000001203b155>] kmalloc_trace+0x40/0x88
[<0000000028adc9c8>] _request_firmware+0xb8/0x608
[<00000000cad1aef7>] firmware_request_nowarn+0x50/0x80
[<000000005011a682>] local_pci_probe+0x48/0xd0
[<00000000077cd295>] pci_device_probe+0xb4/0x200
[<0000000087184c94>] really_probe+0x150/0x2c0
The firmware memory was allocated in ath12k_pci_probe(), but not
freed in ath12k_pci_remove() in case ATH12K_FLAG_QMI_FAIL bit is
set. So call ath12k_fw_unmap() to free the memory.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.2.0-02280-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Avoid memory leak while enabling statistics
Driver uses monitor destination rings for extended statistics mode and
standalone monitor mode. In extended statistics mode, TLVs are parsed from
the buffer received from the monitor destination ring and assigned to the
ppdu_info structure to update per-packet statistics. In standalone monitor
mode, along with per-packet statistics, the packet data (payload) is
captured, and the driver updates per MSDU to mac80211.
When the AP interface is enabled, only extended statistics mode is
activated. As part of enabling monitor rings for collecting statistics,
the driver subscribes to HAL_RX_MPDU_START TLV in the filter
configuration. This TLV is received from the monitor destination ring, and
kzalloc for the mon_mpdu object occurs, which is not freed, leading to a
memory leak. The kzalloc for the mon_mpdu object is only required while
enabling the standalone monitor interface. This causes a memory leak while
enabling extended statistics mode in the driver.
Fix this memory leak by removing the kzalloc for the mon_mpdu object in
the HAL_RX_MPDU_START TLV handling. Additionally, remove the standalone
monitor mode handlings in the HAL_MON_BUF_ADDR and HAL_RX_MSDU_END TLVs.
These TLV tags will be handled properly when enabling standalone monitor
mode in the future.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/vf: Don't try to trigger a full GT reset if VF
VFs don't have access to the GDRST(0x941c) register that driver
uses to reset a GT. Attempt to trigger a reset using debugfs:
$ cat /sys/kernel/debug/dri/0000:00:02.1/gt0/force_reset
or due to a hang condition detected by the driver leads to:
[ ] xe 0000:00:02.1: [drm] GT0: trying reset from force_reset [xe]
[ ] xe 0000:00:02.1: [drm] GT0: reset queued
[ ] xe 0000:00:02.1: [drm] GT0: reset started
[ ] ------------[ cut here ]------------
[ ] xe 0000:00:02.1: [drm] GT0: VF is trying to write 0x1 to an inaccessible register 0x941c+0x0
[ ] WARNING: CPU: 3 PID: 3069 at drivers/gpu/drm/xe/xe_gt_sriov_vf.c:996 xe_gt_sriov_vf_write32+0xc6/0x580 [xe]
[ ] RIP: 0010:xe_gt_sriov_vf_write32+0xc6/0x580 [xe]
[ ] Call Trace:
[ ] <TASK>
[ ] ? show_regs+0x6c/0x80
[ ] ? __warn+0x93/0x1c0
[ ] ? xe_gt_sriov_vf_write32+0xc6/0x580 [xe]
[ ] ? report_bug+0x182/0x1b0
[ ] ? handle_bug+0x6e/0xb0
[ ] ? exc_invalid_op+0x18/0x80
[ ] ? asm_exc_invalid_op+0x1b/0x20
[ ] ? xe_gt_sriov_vf_write32+0xc6/0x580 [xe]
[ ] ? xe_gt_sriov_vf_write32+0xc6/0x580 [xe]
[ ] ? xe_gt_tlb_invalidation_reset+0xef/0x110 [xe]
[ ] ? __mutex_unlock_slowpath+0x41/0x2e0
[ ] xe_mmio_write32+0x64/0x150 [xe]
[ ] do_gt_reset+0x2f/0xa0 [xe]
[ ] gt_reset_worker+0x14e/0x1e0 [xe]
[ ] process_one_work+0x21c/0x740
[ ] worker_thread+0x1db/0x3c0
Fix that by sending H2G VF_RESET(0x5507) action instead. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/net: fix io_req_post_cqe abuse by send bundle
[ 114.987980][ T5313] WARNING: CPU: 6 PID: 5313 at io_uring/io_uring.c:872 io_req_post_cqe+0x12e/0x4f0
[ 114.991597][ T5313] RIP: 0010:io_req_post_cqe+0x12e/0x4f0
[ 115.001880][ T5313] Call Trace:
[ 115.002222][ T5313] <TASK>
[ 115.007813][ T5313] io_send+0x4fe/0x10f0
[ 115.009317][ T5313] io_issue_sqe+0x1a6/0x1740
[ 115.012094][ T5313] io_wq_submit_work+0x38b/0xed0
[ 115.013223][ T5313] io_worker_handle_work+0x62a/0x1600
[ 115.013876][ T5313] io_wq_worker+0x34f/0xdf0
As the comment states, io_req_post_cqe() should only be used by
multishot requests, i.e. REQ_F_APOLL_MULTISHOT, which bundled sends are
not. Add a flag signifying whether a request wants to post multiple
CQEs. Eventually REQ_F_APOLL_MULTISHOT should imply the new flag, but
that's left out for simplicity. |
| In the Linux kernel, the following vulnerability has been resolved:
arm/crc-t10dif: fix use of out-of-scope array in crc_t10dif_arch()
Fix a silly bug where an array was used outside of its scope. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: mp2629: fix potential array out of bound access
Add sentinel at end of maps to avoid potential array out of
bound access in iio core. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring: fix multishot accept request leaks
Having REQ_F_POLLED set doesn't guarantee that the request is
executed as a multishot from the polling path. Fortunately for us, if
the code thinks it's multishot issue when it's not, it can only ask to
skip completion so leaking the request. Use issue_flags to mark
multipoll issues. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: iforce - invert valid length check when fetching device IDs
syzbot is reporting uninitialized value at iforce_init_device() [1], for
commit 6ac0aec6b0a6 ("Input: iforce - allow callers supply data buffer
when fetching device IDs") is checking that valid length is shorter than
bytes to read. Since iforce_get_id_packet() stores valid length when
returning 0, the caller needs to check that valid length is longer than or
equals to bytes to read. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Prevent division by zero
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Prevent division by zero
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Prevent division by zero
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm/smu11: Prevent division by zero
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
(cherry picked from commit da7dc714a8f8e1c9fc33c57cd63583779a3bef71) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Prevent division by zero
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Prevent division by zero
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| A path traversal vulnerability exists in the file dropoff functionality
of ZendTo versions 6.15-7 and prior. This could allow a remote, authenticated attacker to retrieve the files of other ZendTo users, retrieve files on the host
system, or cause a denial of service. |
| A template injection vulnerability exists in Sawtooth Software’s Lighthouse Studio versions prior to 9.16.14 via the ciwweb.pl http://ciwweb.pl/ Perl web application. Exploitation allows an unauthenticated attacker can execute arbitrary commands. |
| An authentication bypass vulnerability exists in ETQ Reliance on the CG (legacy) platform. The application allowed login as the privileged internal SYSTEM user by manipulating the username field. The SYSTEM account does not require a password, enabling attackers with network access to the login page to obtain elevated access. Once authenticated, an attacker could achieve remote code execution by modifying Jython scripts within the application. This issue was resolved by introducing stricter validation logic to exclude internal accounts from public authentication workflows in version MP-4583. |
| An XML External Entity (XXE) injection vulnerability exists in ETQ Reliance on the CG (legacy) platform within the `/resources/sessions/sso` endpoint. The SAML authentication handler processes XML input without disabling external entity resolution, allowing crafted SAML responses to invoke external entity references. This could enable attackers to retrieve sensitive files or perform server-side request forgery (SSRF). The issue was addressed by disabling external entity processing for the affected XML parser in versions SE.2025.1 and 2025.1.2. |
| An authorization bypass vulnerability exists in ETQ Reliance (legacy CG and NXG SaaS platforms). By appending a specific URI suffix to certain API endpoints, an unauthenticated attacker can bypass access control checks and retrieve limited sensitive resources. The root cause was a misconfiguration in API authorization logic, which has since been corrected in SE.2025.1 and 2025.1.2. |
